000
7. Menu Display and Settings: Menu List
98
Maintenance >Audio
Makes settings related to audio.
Item
Setting
Description
CH1 Wind Filter
On/
Off
Turns the channel 1 wind noise reduction filter
on/off.
CH2 Wind Filter
On/
Off
Turns the channel 2 wind noise reduction filter
on/off.
CH2 Wind Filter
On/
Off
Turns the channel 3 wind noise reduction filter
on/off.
CH4 Wind Filter
On/
Off
Turns the channel 4 wind noise reduction filter
on/off.
1kHz Tone on Color
Bars
On/
Off
/Auto
Sets whether to output (On) or not output (Off) a
1 kHz test signal in color bar mode.
Auto: Outputs a test signal only when the AUDIO
SELECT CH1 switch is set to AUTO.
MIC CH1 Level
Side1/
Front
/Front+Side1
Selects the knob for adjusting the audio level
when recording input audio from the front
microphone on channel 1.
Side1: LEVEL knob (left) on the side panel
Front: MIC LEVEL knob on the front panel
Front+Side1: LEVEL knob (left) and MIC LEVEL
knob (linked control)
MIC CH2 Level
Side2/
Front
/Front+Side2
Selects the knob for adjusting the audio level
when recording input audio from the front
microphone on channel 2.
Side2: LEVEL knob (right) on the side panel
Front: MIC LEVEL knob on the front panel
Front+Side2: LEVEL knob (right) and MIC LEVEL
knob (linked control)
Rear1/WRR Level
Side1
/Front/Front+Side1
Selects the knob for adjusting the audio level of a
wireless microphone or a device connected to the
AUDIO IN CH-1 connector on the rear panel.
Side1: LEVEL knob (left) on the side panel
Front: MIC LEVEL knob on the front panel
Front+Side1: LEVEL knob (left) and MIC LEVEL
knob (linked control)
Rear2/WRR Level
Side2
/Front/Front+Side2
Selects the knob for adjusting the audio level of a
wireless microphone or a device connected to the
AUDIO IN CH-2 connector on the rear panel.
Side2: LEVEL knob (right) on the side panel
Front: MIC LEVEL knob on the front panel
Front+Side2: LEVEL knob (right) and MIC LEVEL
knob (linked control)
Maintenance >Audio
Makes settings related to audio.
Item
Setting
Description
Audio CH3 Level
Side3
/Front/Front+Side3
Selects the knob for adjusting the audio level
recorded on channel 3.
Side3: LEVEL knob on the side panel
Front: MIC LEVEL knob on the front panel
Front+Side3: LEVEL knob and MIC LEVEL knob
(linked control)
Audio CH4 Level
Side4
/Front/Front+Side4
Selects the knob for adjusting the audio level
recorded on channel 4.
Side4: LEVEL knob on the side panel
Front: MIC LEVEL knob on the front panel
Front+Side4: LEVEL knob and MIC LEVEL knob
(linked control)
Maintenance >WRR Setting
Makes settings related to the wireless tuner.
Item
Setting
Description
WRR Valid CH Sel
All
/CH1
Selects whether to enable channels 1 and 2 of the
wireless tuner (All) or channel 1 only (CH1).
WRR CH Select
TX1
/TX2
Selects the reception channel for display in the
menu.
TX1: Displays channel 1.
TX2: Displays channel 2.
WRR Delay Comp
On
/Off
Selects whether to enable (On) or disable (Off) the
delay compensation function for wireless input
audio. (When On is selected, all E-E output audio
is delayed by about 8 ms.)
TX
---
Displays the name of the transmitter whose
signals are being received on the channel
selected by WRR CH Select.
TX Audio Peak
---
/Peak
Displays whether the AF level of the transmitter
whose signals are being received on the channel
selected by WRR CH Select are over peak.
TX Input Level
---
/Mic/Line
Displays whether the input level of the transmitter
whose signals are being received on the channel
selected by WRR CH Select is set to microphone
(Mic) or line (Line).
TX ATT Level
---
Sets the ATT level of the transmitter whose signals
are being received on the channel selected by
WRR CH Select. (The setting range varies
depending on the transmitter.)
