Sony PXW-X160, Operating Manual

Page: 42 / 120

Connecting to Other Device via Wireless LAN (PXW-X180 only) 42
Record
ing
The recorded file is stored under the “/PRIVATE/
PXROOT/Clip” directory.
The file name is automatically generated as “a
character string that is set on the Setup menu” +
serial number.
• Number of characters is 1 to 46. Usable
characters are as follows.
—Alphabet (A to Z, a to z), Numerals (0 to 9),
Symbols (! # $ % ( ) + , - . ; = @ [ ] ^ _ ~
(space))
• The serial number is kept even if the camcorder
is turned off. The serial number returns to 0001
by performing All Reset.
You can make a wireless LAN connection
between the camcorder and a device such as a
smartphone or tablet by attaching the supplied
IFU-WLM3 USB wireless LAN module.
Notes
• You cannot use a USB wireless LAN module other
than the IFU-WLM3.
Making a wireless LAN connection between a
device and the camcorder enables you to do the
following.
• Remote operation via a wireless LAN
You can control the camcorder from a
smartphone, tablet, or computer that is
connected to the camcorder via the wireless
LAN.
• File transferring via a wireless LAN
You can transfer a proxy file (low resolution)
that is recorded on an SD card in the camcorder
or original file (high resolution) that is recorded
by the camcorder to the server via the wireless
LAN.
• Video/audio streaming via a wireless LAN
You can create a stream (H.264/AAC-LC
compression) from the video/audio of a
camcorder, and watch the video/audio
streaming by using the “Content Browser
Mobile” application that is installed on a
smartphone, tablet, or computer via the wireless
LAN.
“Content Browser Mobile” application
You can operate the camcorder remotely while
streaming the audio/video of the camcorder, and
perform the settings of the camcorder by using the
“Content Browser Mobile” application.
For details about the “Content Browser Mobile”
application, contact your Sony dealer or a Sony
service representative.
Storage destination of the
recorded file
About the file name
Connecting to Other
Device via Wireless LAN
(PXW-X180 only)