Adjustment Using the Menus
28
[Input Setting]
[SDI1 4K/UHD Input Setting] / [SDI2 4K/UHD Input
Setting]
Submenu
Setting
[Input Setting]
Sets the input setting of the SDI 4K
signal.
[Input Setting1]
[Input Setting2]
[Input Setting3]
[Input Setting4]
[Input]
Set the input connector of the SDI 4K
signal.
[Input1,2,3&4]:
Select to use SDI IN
, SDI IN
, SDI IN
, and
SDI IN
with Quad Link.
[Input1&2]:
Select to use SDI IN
and SDI IN
with Dual Link.
[Input3&4]:
Select to use SDI IN
and SDI IN
with Dual Link.
[Interface Format] Displays the interface format of the 4K
input.
[Quad-Link 3G/HD-SDI]
[Dual-Link 3G-SDI]
[Image Division]
Set the image division of the 4K input.
[Auto]:
Select for the Auto setting.
[2SI]:
Select to receive images of the 2
sample Interleave system.
[Square]:
Select to receive images of
the Square system.
[Signal Format]
Select from the following when
[Interface Format] is [Quad-Link 3G/
HD-SDI].
[Auto]
[422 YCbCr 10bit]
[444 RGB 10bit]
[444 YCbCr 10bit]
[444 RGB 12bit]
[444 YCbCr 12bit]
[444 XYZ 12bit]
[422 YCbCr 10bit] is set when
[Interface Format] is [Dual-Link 3G-
SDI].
[RGB Range]
Select from the following when [Signal
Format] is set to RGB.
[Full]:
0 to 1023 (10bit) / 0 to 4095
(12bit)
[Limited]:
64 to 940 (10bit) / 256 to
3760 (12bit)
[SDI Full Range]
1)
:
4 to 1019 (10bit)
/ 16 to 4079 (12bit)
1) This manual regards the Full Range
signals that are scaled to the
quantized value except the inhibit
code on the SDI standard as the SDI
Full Range.
[Color Space]
Select the color space from the
following:
[ITU-R BT.709]
[EBU]
[SMPTE-C]
[Native]
[S-Gamut/S-Gamut3]
[S-Gamut3.Cine]
[DCI-P3]
[ITU-R BT.2020]
Note
When [Signal Format] is set to [Auto]
or [444 XYZ 12bit] and the XYZ signal
is input, the optimum setting for the
XYZ signal is fixed.
[Transfer Matrix]
Select the transfer matrix from the
following:
[ITU-R BT.709]
[ITU-R BT.2020]
Set the following depending on the
[Color Space] setting.
When [ITU-R BT.2020] is selected:
Select [ITU-R BT.2020].
When [ITU-R BT.709] is selected:
Select [ITU-R BT.709].
When another item is selected: Select
the transfer matrix setting of the device
which outputs the signal.
Note
When [Signal Format] is set to [Auto]
or [444 XYZ 12bit] and the XYZ signal
is input, the optimum setting for the
XYZ signal is fixed.
Submenu
Setting
Summary of Contents for PVM-X550
Page 52: ...Sony Corporation ...