Change 2nd sub-modes.
Game button layout must be "Default". Go to the COD game menu and change button layout to
"Default" if you have other button layout.
Choose for example Mode5 (tap
Select
button a few times until 4th LED will blink 5 times).
1. Push and hold
O
button and tap 1 time
Select
button. Release
O
button. You will see that
4th LED
will blink very fast 3 times and
3rd LED
will be ON. This is mean 2nd sub-mode
number 1. Number 1 is a Drop Shot. Push
R1
to shoot Rapid Fire and Drop the same time.
2. Again push and hold
O
button and tap 1 time
Select
button. Release
O
button. You will see
that
4th LED
will blink very fast 3 times and
3rd LED
will blink 2 times. This is mean 2nd
sub-mode number 2. Number 2 is a Jump Shot. Push
R1
to shoot Rapid Fire and Jump the
same time.
3. Again push and hold
O
button and tap 1 time
Select
button. Release
O
button. You will see
that
4th LED
will blink very fast 3 times and
3rd LED
will blink 3 times. This is mean 2nd
sub-mode number 3. Number 3 is a Drop Aim. Push
L1
to Aim and Drop the same time.
4. Again push and hold
O
button and tap 1 time
Select
button. Release
O
button. You will see
that
4th LED
will blink very fast 3 times and
3rd LED
will blink 4 times. This is mean 2nd
sub-mode number 4. Number 4 is a Quick Aim. Push
R1
to shoot Rapid Fire and Aim the
same time.
5. Again push and hold
O
button and push 1 time
Select
button. Release
O
button. You will
see that
4th LED
will blink very fast 3 times and
3rd LED
OFF. This is mean sub-mode
number 0. Number 0 is a None or without 2nd sub-mode selected. Push
R1
to shoot Rapid
Fire.
Quick toggle to Mode0.
1. Choose any mode. For example Mode5(
4th LED
will blink 5 times).
2. Choose any semiautomatic weapon or pistol.
3. Push
R1
to shoot Rapid Fire and your weapon will shoot Rapid Fire.
4. Now push and hold
L1
" and tap
Select
button 1 time. Release
L1
button. You will see that
4th LED
will blink very fast a few times and then turn OFF.
5. Push
R1
to shoot and you will see that no more Rapid Fire.
6. Again hold
L1
and tap
Select
button 1 time. Release
L1
button. You will see that
4th LED
will blink very fast a few times and then turn ON and will blink 5 times to show that you
back to Mode5.
7. Push
R1
to shoot Rapid Fire and your weapon will shoot Rapid Fire.
This feature toggle between any Mode and Mode0. If you was on Mode5 then it toggle between
Mode5 and Mode0. If you was on Mode7 then it toggle between Mode7 and Mode0. This feature
very useful if you need quick turn OFF Rapid Fire. Mode0 always without Rapid Fire.
Temporarily disable and then enable 2nd sub-mode.
1. Choose for example the same Mode5. Then add Drop Shot.
2. Choose any semiautomatic weapon or pistol.
3. Push
R1
to shoot Rapid Fire and your weapon will shoot Rapid Fire and Drop down.
4. Now with your thumb finger tap 1 time both
X
and
O
buttons the same time. You will see
Summary of Contents for PS3 INFIMOD
