manualshive.com logo in svg

Sony PS-HX500, Operating Instructions Manual

Share
Download
Sony PS-HX500 Operating Instructions Manual Download Page 6

6

Parts and Controls

Front

 Spindle (page 9)

 Rubber mat (page 8, 10)

 Platter (page 8, 9)

Place the platter on the spindle while you are 
assembling your turntable. It has a drive belt 
wound around on the back side.

 SPEED/POWER rotary switch knob  

(page 16, 19)

Rotate the knob to turn on/off your turntable 
or select the rotation speed appropriate to the 
vinyl record to play.

 Dust cover (page 8, 13)

 Dust cover hinges (page 8, 13)

 Counterweight (page 8, 11)

Rotate the counterweight to adjust the tone 
arm balance and the stylus pressure after you 
have assembled your turntable.

 Anti-skating knob (page 10, 12)

Rotate this knob to adjust the anti-skating 
force after you have assembled your turntable.

 

Tone arm lock (page 11, 16, 17)

Lock the tone arm to protect it against physical 
shock when you do not intend to play a vinyl 
record.

 Tone arm lifter lever (page 16)

Use this lever to raise or lower the tone arm. 
The tone arm descends slowly.

 Tone arm rest (page 11, 17)

Place the tone arm here while you are not 
playing a vinyl record.

 Tone arm (page 10, 16, 17)

 Stylus (page 20)

Note

The stylus is a high precision component. 
Handle it with care to avoid damage.

 Cartridge body (page 20)

 Headshell (page 16)

Summary of Contents for PS-HX500





























Reviews:

No comments

Brands by name

Popular brands

Load more brands