background image

23

On Safety

This Installation Guide shows the correct handling of the product 
and important precautions necessary to prevent accidents. It is 
your responsibility to read, thoroughly understand, and follow all 
instructions and this Guide. Failure to do so may result in serious 
personal injury or property damage, and may void the warranty. 
Keep this Guide available for future reference.

RISK OF DEATH OR INJURY

wARNINg

TO PROFessiOnAl insTAlleRs

Be sure to read this Installation Guide thoroughly. 
ProForma is not liable for any damages or injury caused 
by mishandling, improper installation, or use with any 
product other than those recommended. Please give this 
Guide to the customer after installation.

TO CusTOMeRs

Sufficient expertise is required for installing this product. 
If you do not understand this Installation Guide, or are 
unable to perform any part of the installation procedure, 
do not attempt to install this product yourself, and instead 
consult a qualified installer.  Please follow these instructions 
to ensure safety.  Pay special attention to safety during 
the installation.  ProForma is not liable for any damages or 
injury caused by mishandling, improper assembly, improper 
installation, or use with any product other than those 
recommended. 

Keep small children away during the installation.

Cutting or drilling into electrical cords or cables can cause 
death or serious personal injury.

 Always make sure the area 

behind the mounting surface is free of electrical wires and 
cables before drilling or installing fasteners.

Cutting or drilling into water or gas plumbing can cause 
death or serious personal injury.

 Always make sure the area 

behind the mounting surface is free of gas, water, waste, and 
any other plumbing before drilling or installing fasteners.

If the Wall Mount or the TV is not installed correctly, the wall 
bracket or TV may fall and cause serious injury or property 
damage.

This unit is designed to be mounted only on walls of concrete 
or wood stud construction.  Make sure that mounting screws 
are anchored into the center of the studs. Use of an “edge to 
edge” stud finder is highly recommended.

Be sure that two or more persons carry the TV when transporting, 
mounting, or dismounting it.

Do not lean on or hang from the TV.

 Doing so may cause it to 

fall and cause serious injury or property damage.

Use only the supplied screws and attachment parts. 

If you use 

substitute items, the TV or Wall Mount may fall and cause serious 
injury or property damage.

Do not disassemble or modify the Wall Mount. 

Doing so may 

cause it to fall and cause serious injury or property damage.

Do not remove screws, etc., after mounting the TV. 

Doing so 

may cause the TV to fall and cause serious injury or property 
damage.

Do not apply any load other than the TV on the Wall Mount.

 

Doing so may cause the TV to fall and cause serious injury or 
property damage.

Do not install the Wall Mount on curved wall surfaces such as 
a pillar, or where the corners or the sides of the TV protrude 
away from the wall surface. 

If a person or object happens to 

hit the protruded corner or side of the TV, it may cause injury or 
property damage.

Compatible Televisions

The WM-60 Wall Mount is designed for flat 
panel TVs that have “VESA” mount screw 
holes separated by 200, 300, 400, 500 or 600 
millimeters (approximately 8, 12, 16, 20 or 
24 inches). The Wall Mount is designed for 
televisions of screen sizes 46 to 60 inches 
(viewable area, measured diagonally). 
Maximum television weight is 120 lbs. Please 
refer to your TV manual, or contact the 
manufacturer of the TV to verify that it can be 
used with this Wall Mount.

cOnTInuED

 

Summary of Contents for PROFORMA WM60

































Reviews: