background image

E

nglish

8388

¨ ¨ ¨

3

English

SAFETY INSTRUCTIONS

Usually when this product is sold a suitable power cord is provided by

the manufacturer. However, this product is sometimes resold or

transported to another area with a different power system and safety

requirements. Please pay attention to the selection of a suitable power

cord.

The plug on the power cord is intended to serve as the disconnect

device, the socket-outlet shall be installed near the equipment and

shall be easily accessible.

9. Do not allow anything to rest on the power cord.  Do not locate this

product where persons can walk on the cord.

10. Never push objects of any kind into this product through cabinet slots

as they may touch dangerous voltage points or short out parts that

could result in the risk of fire or electric shock. Never spill liquid of

any kind on the product.

11. Do not attempt to service this product yourself, as opening or removing

covers may expose you to dangerous voltage points, or other risks.

Refer all servicing to service personnel.

12. Unplug this product from the wall outlet and refer servicing to qualified

service personnel under the following conditions.

A. When the power cord or plug is damaged or frayed.

B. If liquid has been spilled into the product.

C. If the product has been exposed to rain or water.

D. If when the operating instructions are followed, the product does

not operate normally, adjust only those controls that are covered

by the operating instructions since improper adjustment of other

controls may result in damage and will often require extensive work

by a qualified technician to restore the product to normal operation.

E. If the product has been dropped or the cabinet has been damaged.

F. If the product exhibits a distinct change in performance, indicating

a need for service.

Summary of Contents for PR705F

















Reviews: