Chapter 4
Viewfinder Screen Indications and Menus
53
Chapter 4 Viewfinder Screen Indications and Menus
Basic menu page 5
This menu is displayed only when an external sync
signal is input to the camera adaptor or VTR connected
to the camera head.
m
S C P H A S E : 9 9 9
H P H A S E : 1 0 0
a) This applies when using an external sync signal to
synchronize operation of several cameras (see page 34).
Basic menu page 6
M A R K E R : O N
m
D U R T I M E :
M M : S S
0 0 : 0 0
Item
Settings
SC PHASE
Sub carrier phase
adjustment for
when camera is
genlocked.
a)
000 (normal value) to 999
H. PHASE
Horizontal phase
adjustment for
when camera is
genlocked.
a)
000 to 100 (normal value) to 199
Setting the recording time in seconds
Move the cursor to DUR TIME, then press the UP/ON
button or DOWN/OFF button.
A value of seconds is displayed under “SS”.
M A R K E R : O N
m
D U R T I M E :
M M : S S
0 0 : 2 5
Setting the recording time in minutes
1
Press the MENU/STATUS switch to move the
cursor to DUR TIME, then press the UP/ON
button until the “seconds” value (under “SS”)
exceeds 59.
The minute value appears below “MM”.
2
Repeat step
1
to set the desired time value.
M A R K E R : O N
m
D U R T I M E :
M M : S S
0 1 : 0 0
Item
Settings
MARKER
Sets MARKER display ON/OFF.
ON (normal value), OFF
MARKER is displayed
when this setting is ON
and is not displayed
when it is OFF.
When the setting is ON,
go to Advanced Menu 4
to select the type of
marker
(see page 58).
DUR TIME
Sets the recording time
Setting the recoriding time
before shooting helps you with
making scenes of equal
duration.
When shooting with displaying
the recording time of the current
cut in the viewfinder (with the
REC TIME switch set to DUR),
the recording time indication
flashes to remind you that the
recording time has passed.
00:00 to 59:59 (minute
to second)
See “Setting the
recording time in
seconds” and “Setting
the recording time in
minutes” below.
