Sony PMW-F5, Operating Instructions Manual

Page: 53 / 134

Sub Display Setting Items 53
Se
tt
ings
CAMERA-2
FILE-1
FILE-2
Sensitivity/Gain/
Exposure Index Sets the sensitivity/gain.
The item name (Sensitivity/Gain) and setting value differ, depending on the “Mode”
setting in “Gain”
(page 61) . (See page 61 for the selectable item.)
The item name becomes “Exposure Index” and sets the EI value when “Shooting Mode”
(page 91) is set to “Cine EI.” (See page 62 for the selectable item.)
User Gamma: Selects the user gamma. (User1 / User2 / User3 / User4 / User5)
When the CBK-55BK is attached
You can select the setting value for each position (L/M/H) of the GAIN/EI switch on the
CBK-55BK. The GAIN switch position is displayed on the left of the setting value.
Gamma/High Latitude
Sets the gamma category and gamma table.
STD: Selects the standard gamma. STD1 DVW / STD2 ×4.5 / STD3 ×3.5 / STD4 240M
/ STD5 R709 / STD6 ×5.0
HG: Selects the hyper gamma. HG1 3250G36 / HG2 4600G30 / HG3 3259G40 / HG4
4609G33 / HG7 8009G40 / HG8 8009G33
S-Log2: Selects S-Log2.
S-Log3: Selects S-Log3.
Note
“High Latitude” is displayed when “Shooting Mode” (page 91) is set to “Cine EI.”
MLUT Selects and sets LUT/Look Profile. (See page 78 for the selectable item.)
Item name Setting
Item name Setting
Color Bars Turns the color bars on/off.
Auto White Performs the auto white balance function.
(This setting is available only when “White Switch” is set to “Memory A/Memory B.”)
Auto Black Performs the auto black balance function.
Sub&HDMI Selects whether to apply monitor LUT for the output image from SDI (Sub) and HDMI
when “Shooting Mode”
(page 91) is set to “Cine EI.”
Viewfinder Selects whether to apply monitor LUT for the viewfinder image when “Shooting Mode”
(page 91) is set to “Cine EI.”
SDI (Sub) Disp.
Select whether to output the character information and marker to the SDI (Sub) output.
FILE Screen
Item name Setting
All File Load 1 to 6 Loads the All file (1 to 6) from the SD card that is inserted into the SD card slot.
Item name Setting
Scene Recall 1 to 5/
Standard Loads the Scene file (1 to 5, or Standard) from the internal memory.