Specifications
122
A
ppe
ndic
e
s
Mass
Approx. 2.2 kg (4 lb 14 oz) (Camcorder
only)
Approx. 2.6 kg (5 lb 12 oz) (With lens
hood (1), eyecup (1), battery pack BP-
U30 (1), SxS memory card (1))
Dimensions
Approx. W172 mm × H164 mm ×
D428 mm
(6
7
/
8
× 6
1
/
2
× 16
7
/
8
inches)
(Outermost dimensions. Depth is the
length from the front panel of the lens
hood to the EVF eyecup.)
Approx. W172 mm × H164 mm ×
D326 mm
(6
7
/
8
× 6
1
/
2
× 12
7
/
8
inches)
(Not including extruding parts. Depth
is the length from the front panel of the
lens hood to the back of the unit.)
Power requirements
DC 12 V (11.0 V ~ 17.0 V)
Power consumption
Approx. 13 W
while recording with LCD Off, EVF
On and I/O Select Off
Approx. 19 W
while recording with LCD On, EVF
On, I/O Select HD SDI & HD HDMI
when the external device connector is
used
Inrush current
(1) Maximum possible inrush current at
initial switch-on (Voltage changes
caused by manual switching): 50 A
peak, 9.5 A r.m.s. (240V AC)
(2) Inrush current after a mains
interruption of five seconds (Voltage
changes caused at zero-crossing): 3 A
peak, 0.7 A r.m.s. (240V AC)
Operating temperature
0°C ~ +40°C
Storage temperature
–20°C ~ +60°C
Continuous operation time
(While recording with LCD Off, EVF
On and I/O Select Off)
With battery pack BP-U90: approx. 5
hours, 30 minutes
With battery pack BP-U60: approx. 3
hours, 40 minutes
With battery pack BP-U30: approx. 1
hour, 50 minutes
Recording format (video)
UDF
HD422 mode: MPEG-2 422P@HL,
50Mbps / CBR
HD420 mode: MPEG-2 MP@HL,
35Mbps / VBR
DVCAM mode: DVCAM
FAT
HQ 1920 mode: MPEG-2 MP@HL,
35Mbps / VBR
HQ 1440 mode: MPEG-2 MP@HL,
35Mbps / VBR
HQ 1280 mode: MPEG-2 MP@HL,
35Mbps / VBR
SP 1440 mode: MPEG-2 MP@H-14,
25 Mbps / CBR
DVCAM mode: DVCAM
Recording format (audio)
UDF
HD422 mode: LPCM (24-bit, 48 kHz, 4
channels)
Other modes: LPCM (16-bit, 48 kHz, 4
channels)
FAT
HD Mode: LPCM (16-bit, 48 kHz, 4
channels)
SD Mode: LPCM (16-bit, 48 kHz, 2
channels)
Specifications
General
Summary of Contents for PMW-150
Page 131: ......
