Sony PMW-100, Operating Instructions Manual

Page: 76 / 142

Showing the Status Screens 76
St
at
us
Di
s
p
la
y
s
Press the STATUS button (page 15) to display
status screens on the LCD monitor/EVF screen/
external video monitor.
Use the up/down buttons
(page 15) or the jog dial
(page 16) to perform operations and switch the
screens in sequence.
When you press the STATUS button again, the
status screen display is canceled.
For connections of an external monitor, see
“Connecting External Monitors and Recording
Devices” on page 105.
White Bal: White balance status
Gain: GAIN switch settings
The gain values of the positions L, M, and H of
the GAIN switch assigned in the CAMERA SET
menu are displayed.
Handle Zoom Speed: Handle zoom speed
settings
The speed values assigned to each position of the
Zoom Speed switch
(page 15) in “Zoom Speed”
(page 84) in the CAMERA SET menu are
displayed.
Zebra: Zebra status
Skin Tone Detail: Skin-tone detail status
The current status (On or Off) of “Setting” of
“Skin Tone Detail” of the PICTURE PROFILE
menu is displayed.
Picture Profile: Picture Profile selection status
The selected Picture Profile number and name are
displayed. (If Picture Profile is off, “Off” is
displayed.)
Status Displays
Showing the Status Screens
Camera Status Screen
Display Contents
B The color temperature stored in white
memory B is indicated.
A The color temperature stored in white
memory A is indicated.
PRST The color temperature set as the preset
white is indicated. The color temperature of
preset white can be changed using the
PICTURE PROFILE menu.
Display Contents
H Speed obtained when the zoom speed
switch is set to the H position
L Speed obtained when the zoom speed
switch is set to the L position
Display Contents
1
“On” is displayed and the setting of
“Zebra1 Level” in “Zebra” in the LCD/VF
SET menu is displayed to the right when
“Zebra Select” in “Zebra” in the LCD/VF
SET menu is set to “1” or “Both” and you
set the Zebra function to “On.” If the Zebra
function is set to “Off” or “Zebra Select” is
set to “2,” “Off” appears.
2 “On” is displayed when “Zebra Select” in
“Zebra” in the LCD/VF SET menu is set to
“2” or “Both” and you set the Zebra
function to “On.” If the Zebra function is
set to “Off” or “Zebra Select” is set to “1,”
“Off” appears.