– 5 –
Basic Operations
8
Playing a tape
For hookup instructions, see pages 32 - 36.
1
Press
Z
PUSH OPEN/CLOSE to
open the tape compartment and
insert a recorded tape. Use TYPE I
(normal), TYPE II (high position)
and TYPE IV (metal) tapes.
2
Press
Z
PUSH OPEN/CLOSE to
close the compartment.
3
Press
N
.
(On the remote, press TAPE
N
.)
The player turns on (direct
power-on) and starts playing.
Display
1, 2
3
With the side you want
to play facing up
Tape counter
Basic Operations
Basic Operations
9
Use these buttons for additional operations
To
Press
adjust the volume
, –
(VOL +, – on the remote)
stop playback
x
play the reverse side
n
fast-forward or
rewind the tape
TAPE
M
or
m
eject the cassette
Z
PUSH OPEN/CLOSE
turn on/off the player
POWER
To select the direction mode of the tape
Press DIR MODE repeatedly.
To play
Display shows
one side of the tape
both sides of the tape
from the upper side to reverse
side only
both sides of the tape repeatedly
Tips
• Press COUNTER RESET
to reset the counter to
“000”.
• Next time you want to
listen to a tape, just
press
N
or
n
. The
player turns on
automatically and starts
playing the tape.
DIR MODE
n
x
, –
TAPE
m
,
M
COUNTER RESET
POWER
Z
PUSH OPEN/CLOSE
Basic Operations
10
Recording on a tape
For hookup instructions, see pages 32 - 36. To record on a
MiniDisc or DAT recorder, connect the component (see
page 38).
1
Press
Z
PUSH OPEN/CLOSE to
open the tape compartment, and
insert a blank tape. Use TYPE I
(normal) tape only.
Press
Z
PUSH OPEN/CLOSE
again to close the compartment.
2
Select the program source you
want to record.
To record from the CD player:
Insert a CD (see page 4) and press
x
on the CD section.
To record from the radio:
Tune in the station you want (see
page 6).
3
1
With the side you want
to record on facing up
Display
3
3
Basic Operations
Basic Operations
11
continued
3
Start recording.
To record the whole CD
Press CD DUBBING.
When
is displayed:
If the tape is reversed with the
recording of the track unfinished,
the player will record the track
again from its beginning on the
reverse side.
When
is displayed:
If the tape reaches to its end, the
player stops.
To record the radio
(You can also record the CD
according to the following
procedure. Play the CD after
the
tape starts recording.)
Press
z/X
and then
N
.
To record on the reverse side,
press
n
.
(On the remote, while keeping
z/X
pressed, press TAPE
N
or
n
.)
m
