Sony PlayStation PSP-1003, Instruction Manual

Page: 145 / 152

145
Ad
diti
onal
inf
o
rma
tion
Troubleshooting
,
Depending on the access point setting, you may need to enter the system's
MAC address (
page 101).
, When communicating with another system in Ad Hoc Mode, both systems
must be set to the same channel (
page 113).
The Web page won't display properly.
,
Some Web pages may not display properly.
There is no sound, or the sound quality from the Headphones is
poor.
, Check that the Headphones are fully inserted into the system ( page 27).
, Check that the headset connector and the headphone plug are clean. If not,
wipe them with a dry, soft cloth. See also "There is no sound."
(
page 141).
, The ear friendly Headphones are specifically designed to limit sound
pressure level to a maximum of 90dB.
The Remote Control does not work.
, Check that the Headphones are fully inserted in the system ( page 27).
, Check that the Remote Control is not in Hold Mode. If it is, clear Hold
Mode (
page 23).
The system or AC Adaptor is warm.
,
During use, the system or AC Adaptor may become warm. This is not a
malfunction.
The system is turned on, but does not operate.
,
Check that the system is not in Hold Mode. If it is, slide the POWER/HOLD
switch up to clear Hold Mode (
page 34).
Headphones with Remote Control
Other issues