18
Operations
O
p
er
at
io
n
s
Playing Back Video Clips
on a Recorder
When you connect this unit to a
PMW-EX30 recorder, video clips stored on
the unit can be displayed as thumbnail
(reduced size) images and played back on
the LCD panel of the recorder.
1
Connect this unit to the BC-U1 or
BC-U2 battery charger using the DC
power output cord supplied with the
battery charger.
Connect the AC power cord of the
battery charger, and set the mode select
switch on the battery charger to the DC
OUT.
For details, refer to the operating instructions
of the battery charger.
2
Connect this unit to the recorder with
the PHU connection cable.
Insert the card of the PHU connection
cable into one of the card slots on the
recorder.
Connect the connector of the PHU
connection cable to the USB connector
on this unit.
3
Select the drive on which the video
clips are stored using the drive select
switch.
4
Press the power switch on this unit for
about three seconds to turn the unit on.
5
Play back the video clips using the
PMW-EX30.
For information on operating the PMW-EX30,
refer to the operating instructions of the
PMW-EX30.
Copying Video Clips to
Editing Equipment
You can connect this unit to a video editing
computer, and copy the video clip stored on
this unit to the computer. The XDCAM EX
Clip Browsing Software supplied with the
camcorder must be installed in the
computer.
Connecting to a computer
We recommend using the BC-U1 or BC-U2
battery charger to ensure a steady supply of
AC power during data transfer.
Note
Power cannot be supplied from the
computer.
1
Connect this unit to the BC-U1 or
BC-U2 battery charger using the DC
power output cord supplied with the
battery charger.
Connect the AC power cord of the
battery charger, and set the mode select
switch on the battery charger to the DC
OUT.
For details, refer to the operating instructions
of the battery charger.
DC O
UT
CHA
RGE
BATT
ERY
CHA
RGE
R
BC-U
1
0%
80
100
Battery charger
