Sony PDW-75MD Instructions For Use Manual Download Page 84

Page: 84 / 103

System Menu

Cha

r 6

nu
s

The disc menu contains the following items. Characters
and symbols inside the brackets [ ] appear in the time data
display section.

STATUS [Status]

Displays disc or clip status.

DISC [> Disc]:

Displays the DISC STATUS screen.

CLIP [> Clip]:

Displays the CLIP STATUS screen.

The PDZ-1 Proxy Browsing Software allows you to write
TITLE1 and TITLE2 to the disc, but only TITLE1 appears
here.

DELETE [Delete]

Deletes clips from the disc.

LAST CLIP [> Last Clip]:

Deletes the most recently

recorded clip.

ALL CLIP [> All Clip]:

Delete all clips. (Clips in the

General directory are not deleted.)

FORMAT [Format]

Formats a disc.

QUICK FORMAT [>Quick Format]:

Deletes all

data on the disc, including the contents of the
General directory.

Disc Menu Operations

To display the status of the current disc or
clip

Insert a disc, and then proceed as follows.

Display the disc menu

(see page 74)

Press the

/MARK1 button or

/MARK2 button to

select STATUS.

Press the

/OUT button.

Select DISC or CLIP and press the

/OUT button.

If you selected DISC, the status of the loaded disc
appears.

If you selected CLIP, the status of the current clip
appears.

When playback or search reaches a new clip, the
display changes to the status of the new clip.

To return to the next highest level

Press the MENU button.

To clear the menu from the screen

Press the MENU button twice.

To delete the most recent recorded clip

If the clip is locked, it cannot be deleted.

Proceed as follows.

Display the disc menu

(see page 74)

Press the

/MARK1 button or the

/MARK2 button

to select DELETE.

Press the

/OUT button.

The name of the clip to be deleted appears.

Press the SET button.

The clip is deleted, and the number of the deleted clip
appears.

To return to the next highest level without deleting
the clip

Note

DISC MENU

STATUS

DELETE
FORMAT

Note

DISC STATUS

: 029 min
: 0002 times
: OK
: OK

: MENU KEY

USER ID:
TITLE :

REMAIN
REWRITE
SALVAGE
FILE SYSTEM

TO MENU

CLIP STATUS

: E0001
E0001
: PDW-75MD
: 10001
: 06/3/02
: 19:54:38

: MENU KEY

CLIP LIST MODE

CLIP LIST NEME
TITLE:
RECORD DEVICE
SERIAL
DATE
TIME

TO MENU

Summary of Contents for PDW-75MD








































































































Search results

Summary of Contents for PDW-75MD

Reviews:

Related manuals for PDW-75MD

Brands by name

Popular brands

Sony PDW-75MD, Instructions For Use Manual

Search results

Summary of Contents for PDW-75MD

Reviews:

Related manuals for PDW-75MD

Brands by name

Popular brands