Sony PCV-RXP-RZP System Reference Manual Download Page 94

Page: 94 / 100

VAIO Digital Studio System Reference Manual

I/O and Expansion Slots

Floppy Disk Drive and Controller

Hard Drives and Controller

Speaker DC Out jack

One connection for speaker power cable.

Printer port

One high-speed bi-directional
Centronics-compatible port with ECP and EPP
modes.

Modem jacks

Two RJ-11 jacks (telephone and line).
(See online specifications sheet for details.)

USB 2.0 ports

* Universal Serial Bus (USB) 2.0 technology supports high/full/low speeds.

USB1 and USB2 (front panel)
USB3, USB4, USB5, USB6 (rear panel)
(See online specifications sheet for details.)

AGP slot

One slot for an AGP card.

PCI slots

Not all PCI slots are available for expansion.
(See online specifications sheet for details.)

CNR slot

One slot for a CNR modem.

IDE headers

Primary and secondary (each supports two IDE
drives)

i.LINK®
(IEEE 1394) ports

One 4-pin port on the front panel
One 6-pin port on the rear panel

Drive

Description

Floppy disk controller

82077-compatible (supports up to 2.88 MB)

Floppy disk drive

3.5-inch, 1.44 MB.

Drive

Description

EIDE controller

Supports up to four EIDE drives (supports PIO
Mode 4 EIDE drives and Ultra DMA/100 Mode
drives)

IDE hard drive

* Bus-mastering EIDE driver installed.

See online specifications sheet for details.

Summary of Contents for PCV-RXP-RZP





































































































Search results

Summary of Contents for PCV-RXP-RZP

Reviews:

Related manuals for PCV-RXP-RZP

Brands by name

Popular brands

Sony PCV-RXP-RZP, System Reference Manual

Search results

Summary of Contents for PCV-RXP-RZP

Reviews:

Related manuals for PCV-RXP-RZP

Brands by name

Popular brands