4-1
PCV-RX6_ _Series (AM)
Confidential
SECTION 4
SERVICE INFORMATION
(END)
4-1.
JUMPER SETTING ON HARD DISK DRIVE
The hard disk drive of service parts can be used without changing factory jumper setting, when it was replaced for service.
Master/Slave selection
Jumper setting
J42 Factory Reserved
J44 Factory Reserved
J46 Cylinder Limitation
J48 Cable Select
J50 Master/Slave
Only drive in single drive system
Master drive in dual drive system
Slave drive in dual drive system
Configuration Jumper Settings
Part No.
Maker
Code
Capacity
Memo
(formatted)
A-8110-897-A
Seagate
ST340810A
40 GB
A-8025-545-A
Seagate
ST360020A
60 GB
A-8058-425-A
Seagete
ST380020A
80 GB
Part No.
Maker
Code
Capacity
Memo
(formatted)
A-8059-699-A
Maxtor
4G120J6
120 GB
Master or single drive
Drive is a slave
Master with a non-ATA
compatible slave
Enable cable select
1
7
2
8
Limit capacity
>32 Gbytes = 32 Gbytes
<32 Gbytes = 2.1 Gbytes
Configuration Jumper Setting
