manualshive.com logo in svg

Sony PCV-RS101 - Vaio Desktop Computer, System Reference Manual, Page: 11 / 94

Share
Download
Sony PCV-RS101 - Vaio Desktop Computer System Reference Manual Download Page 11

xi

Industry Canada Notice

This equipment meets the applicable Industry 
Canada technical specifications. 

The Ringer Equivalence Number (REN) is an 
indication of the maximum number of devices 
allowed to be connected to a telephone interface. 
The termination on an interface may consist of 
any combination of devices subject only to the 
requirement that the sum of the RENs of all the 
devices does not exceed 5.

Avis de l’Industrie Canada

Le presént matériel est conforme aux spécifications 
techniques applicables d’Industrie Canada.

L’indice d’équivalence de la sonnerie (IES) sert à 
indiquer le nombre maximal de terminaux qui 
peuvent être raccordés à une interface téléphonique. 
La terminaison d’une interface peut consister en une 
combinaison quelconque de dispositifs, à la seule 
condition que la somme d’indices d’équivalence de 
la sonnerie de tous les dispositifs n’excède pas 5.

Summary of Contents for PCV-RS101 - Vaio Desktop Computer































































































Reviews:

No comments