Sony PCV-J120 - Vaio Desktop Computer Reference Manual Download

Page: 53 / 114

Removing, Installing, and Replacing Components

Covering an Open I/O Slot

Slot covers prevent air from escaping through the empty hole. If air
escapes, the components inside the computer cannot be properly cooled.
This may damage some components, especially the main processor
(which generates the most heat).

Slide the tip of the slot cover (removed earlier) between the chassis
and system board.

Push the slot cover down until it rests firmly on the lip in the chassis.
All add-in card brackets and slot covers rest on this lip.

Replace the screw (removed earlier) to secure the I/O slot cover.

KY0076.VSD

Summary of Contents for PCV-J120 - Vaio Desktop Computer



















































































































Search results

Summary of Contents for PCV-J120 - Vaio Desktop Computer

Reviews:

Related manuals for PCV-J120 - Vaio Desktop Computer

Brands by name

Popular brands

Sony PCV-J120 - Vaio Desktop Computer, Reference Manual

Search results

Summary of Contents for PCV-J120 - Vaio Desktop Computer

Reviews:

Related manuals for PCV-J120 - Vaio Desktop Computer

Brands by name

Popular brands