PCM-D50. US. 3-277-770-11(2)
32
Operations after Recording (continued)
To change the memory drive
The recorder supports the use of “Memory
Stick” in addition to the built-in memory.
You can switch the memory as follows.
When you insert a “Memory Stick,” make
sure that the recorder is not recording or
playing a track. Make sure that it is
stopped.
1
While the recorder is stopped, press and
hold the
/MENU button until the menu
is displayed.
2
Press the
FF/
and
FR/
buttons
to select “MEMORY,” and press the
PLAY/ENTER button.
The screen used to select the memory is
displayed.
3
Press the
FF/
and
FR/
buttons
to select the desired memory, and press
the
PLAY/ENTER button to fix the
setting.
Operations during playback
To
Operation
Stop playback
Press the
STOP button.
Pause playback Press the
PAUSE button.
flashes on the display.
To resume play after pausing,
press the
PAUSE button
again.
Fast forward
(Cue)
Press and hold the
FF/
button.*
Fast reverse
(Review)
Press and hold the
FR/
button.*
Go back to the
beginning of the
current track
Press the
FR/
button
once.
To
Operation
Go back to
previous tracks
Press the
FR/
button
repeatedly.**
Go to the
beginning of the
next track
Press the
FF/
button
once.**
Go to the
beginning of
succeeding
tracks
Press the
FF/
button
repeatedly.
If you press and hold the button, the recorder goes
forward or backward slowly at first, and then at
gradually higher speed.
** These operations are for when “EASY SEARCH” is
set to “OFF.”
When tracks are played back to the end of
the last track
When you play back or fast play back to the end of
the last track, “TRACK END” lights up for 5
seconds. When “TRACK END” goes off, the
recorder will stop at the beginning of the last track.
If you press and hold the
FR/
button while
“TRACK END” is lit, the tracks are played back
rapidly, and normal playback will start at the point
you release the button.
If the last track is long and you wish to start
playback at a later part of the track, press and hold
the
FF/
button to go to the end of the track
and then press the
FR/
button while “TRACK
END” is lit to go back to the desired point.
For tracks other than the last one, go to the
beginning of the next track and then fast-rewind to
the desired point during playback.
Note
During playback, do not remove the batteries or AC
power adapter. Doing so may cause noise in audio
output from the LINE OUT (OPT) jack and
(headphone) jack.
*
