PCM-D10
5
Sony CONFIDENTIAL
For Authorized Servicer
SECTION 1
SERVICING NOTES
The SERVICING NOTES contains important information for servicing. Be sure to read this section before repairing the unit.
MODEL IDENTIFICATION
It can identify the destination by checking the model number label
af
fi
xed to the rear side of the main unit. Refer to the
fi
gure below.
Note:
Print contents of the model number label may be changed in the mid-
way of production.
– Rear view –
E model
US, Canadian models
Chinese model
PROCESSING AFTER THE COMPLETION OF REPAIRS
After the repair of the main unit has been completed all, before re-
turning the main unit to customer, be sure to execute “4-12. Factory
Shipment” on page 55.
Executing “Factory Shipment” will initialize the built-in memory
fi
les and settings. Backup the built-in memory
fi
les to a PC or SD
card etc. beforehand, and after executing “Factory Shipment”, trans-
fer the
fi
les to the same folder in the main unit again.
For the method of backup, refer to “BACKUP OF THE BUILT-IN
MEMORY FILES” on the right.
BACKUP OF THE BUILT-IN MEMORY FILES
Before repairing this unit, save each data recorded in the built-in
memory to a PC or SD card.
Note 1:
This section explains how to use for Windows PC. When using a
MAC, refer to the operating instructions or the help guide of this
unit.
1. Save each data recorded in the built-in memory to a
PC
1-1. Beforehand preparation
Prepare the following equipment etc.
• PC (Windows 7 Service Pack 1 or later)
• USB
Type-C
cable
• Size AA batteries (4)
Open the battery lid on the rear side of main unit, install the four
size AA batteries.
Note
2:
Use the following batteries so that the batteries will not run out
during work.
New
alkaline
battery
or
Fully charged Ni-MH battery
1-2. Connect this unit to a PC
Use the USB Type-C cable to connect the USB Type-C terminal of
this unit to the USB port of the running PC.
PC
To USB port
USB
Type-C port
USB Type-C cable
1-3. Check that the PC is correctly recognizing this unit
Open the “Computer” and check that “PCMRECORDER” or
“MEMORY CARD” is newly recognized.
– Continued on next page –
Ver. 1.1
SYS SET
2019/03/08 01:38:10 (GMT+09:00)