Sony PCG-SRX51P/B User Manual Download

Page: 21 / 123

Sony Notebook

User Guide

Using your notebook

Connecting a power source

You can use either an AC adapter or a rechargeable battery pack as a power source.

Using the AC adapter

To use the AC adapter, proceed as follows:

Plug the cable attached to the AC adapter (1) into the DC In connector (2) on the computer.

Plug one end of the power cord (3) into the AC adapter.

Plug the other end of the power cord into an AC outlet.

✍

Use your notebook only with the supplied AC adapter.

To disconnect your notebook completely from mains voltage, unplug the AC adapter.

Make sure that the socket outlet is easily accessible.

Some models may be supplied with two power cords, one for a UK power outlet and one for a continental. If this is the case, please make sure you
use the correct power cord for the country you are in.

Summary of Contents for PCG-SRX51P/B




























































































































Search results

Summary of Contents for PCG-SRX51P/B

Reviews:

Related manuals for PCG-SRX51P/B

Brands by name

Popular brands

Sony PCG-SRX51P/B, User Manual

Search results

Summary of Contents for PCG-SRX51P/B

Reviews:

Related manuals for PCG-SRX51P/B

Brands by name

Popular brands