Sony PCG-K23 - VAIO - Mobile Pentium 4 2.8 GHz User Manual Download

Page: 110 / 149

Removing PC Cards

You can remove PC Cards while the computer is on or off. PC Cards draw power from the computer when they are inserted
into the PC Card slot, whether or not you use the card.

If you are not using your PC Card and you are using a battery as a power source, remove the PC Card from the PC Card
slot to conserve battery power.

To remove a PC Card while your computer is on

Double-click the

Safely Remove Hardware

icon

on the taskbar. The

Safely Remove Hardware

dialog box

appears.

Click to select the PC Card

in the Hardware devices window, if it is not already selected

Click

Stop

. The

Stop a Hardware device

window appears.

Make sure the PC Card is selected, and click

OK.

A message appears stating it is safe to remove the hardware

device.

Push the Release button. The Release button pops out.

Push the Release button a second time. The PC Card pops out.

Gently pull the card out of the slot.

To remove a PC Card while the computer is off

Push the Release button once. The Release button pops out.

Push the Release button a second time. The PC Card pops out.

Gently pull the card out of the slot.

Page 110

Summary of Contents for PCG-K23 - VAIO - Mobile Pentium 4 2.8 GHz






















































































































































Search results

Summary of Contents for PCG-K23 - VAIO - Mobile Pentium 4 2.8 GHz

Reviews:

Related manuals for PCG-K23 - VAIO - Mobile Pentium 4 2.8 GHz

Brands by name

Popular brands

Sony PCG-K23 - VAIO - Mobile Pentium 4 2.8 GHz, User Manual

Search results

Summary of Contents for PCG-K23 - VAIO - Mobile Pentium 4 2.8 GHz

Reviews:

Related manuals for PCG-K23 - VAIO - Mobile Pentium 4 2.8 GHz

Brands by name

Popular brands