Sony PCG-GRV616G Page 132 Software Manual Download

Page: 132 / 134

Software Guide

Using the product recovery CD-ROMs

131

To perform a recovery with options, proceed as follows:

Select the button next to

Option Recovery

Click

Next

You now have three options:

❑

Default System Drive Recovery, (see

Recovering the system without changing partition sizes

(page 130)

❑

Change Partition Size and Recover.

❑

Recovery To Originally Shipped State.

Manually changing partition sizes

Choosing

Change Partition Size and Recover

allows you to manually select the size of your C: drive,

leaving the remaining gigabytes to the D: drive. Meanwhile, all current partition sizes are deleted, the hard
disk is reformatted, and all the original software is restored as with a standard system recovery.

You should allow one hour for this process.

To manually change the partition sizes and perform a system recovery, proceed as follows:

Select the button next to

Change Partition Size and Recover

Click

Next

In the following screen, set the size of your C: drive in gigabytes, or choose to restore the default size by
pressing

Default

Click

Next

Read the summary of the recovery process about to be performed and click

Next

to start the process.

Click

Yes

to confirm.

When asked to do so, remove the CD and insert the next one.

When the process is finished, click

Summary of Contents for PCG-GRV616G







































































































































Search results

Summary of Contents for PCG-GRV616G

Reviews:

Related manuals for PCG-GRV616G

Brands by name

Popular brands

Sony PCG-GRV616G, Software Manual

Search results

Summary of Contents for PCG-GRV616G

Reviews:

Related manuals for PCG-GRV616G

Brands by name

Popular brands