Sony PCG-GRT250 - VAIO - Pentium 4 2.66 GHz User Manual Download Page 69

Page: 69 / 208

see

Using power saving modes

Close all programs that access the optical drive, and wait for the Busy indicator on the drive cover to turn off.

Press the Eject button on the drive cover to open the drive tray. The drive tray slides out.

If the Eject button does not work, turn off the computer and insert a thin, straight object (such as a paper clip)

into the manual eject hole next to the Eject button.

Lift the disc from the drive.

Push the drive tray gently to close it.

Page 69

Summary of Contents for PCG-GRT250 - VAIO - Pentium 4 2.66 GHz

















































































































































































































Search results

Summary of Contents for PCG-GRT250 - VAIO - Pentium 4 2.66 GHz

Reviews:

Related manuals for PCG-GRT250 - VAIO - Pentium 4 2.66 GHz

Brands by name

Popular brands

Sony PCG-GRT250 - VAIO - Pentium 4 2.66 GHz, User Manual

Search results

Summary of Contents for PCG-GRT250 - VAIO - Pentium 4 2.66 GHz

Reviews:

Related manuals for PCG-GRT250 - VAIO - Pentium 4 2.66 GHz

Brands by name

Popular brands