Sony PCG-FX103/K User Manual Download Page 81

Page: 81 / 109

Sony

not

book

r gui

Getting help

The screen image on my external display is not centered or sized properly

Use the controls on your external display to adjust the image.

The window I have just closed continues to appear on my LCD

Press the

Windows

key and

key twice to refresh the screen.

I cannot switch from LCD display to TV and vice versa*

If the DVD disk is inserted in the DVD-ROM drive, remove the disk.

* Not available on PCG-FX101 and PCG-FX103.

About CD-ROMs and diskettes

My optical disk drive tray does not open

Make sure the computer is turned on.

Press the

Eject

button on the optical disk drive*.

If the

Eject

button does not work, you can open the tray by inserting a sharp, pointed object into the

hole to the right of the

Eject

button.

* CD-ROM: PCG-FX101

DVD-ROM: PCG-FX103/PCG-FX105K/PCG-FX108K

CD-RW/DVD-ROM: PCG-FX109K

I cannot play a CD-ROM disk

Make sure the label of the disk is facing up.

Summary of Contents for PCG-FX103/K














































































































Search results

Summary of Contents for PCG-FX103/K

Reviews:

Sony PCG-FX103/K, User Manual, Page: 81 / 109

Search results

Summary of Contents for PCG-FX103/K

Reviews: