NXLK-IP50Y (GB) 5-015-814-
51 (1)
Indicator
Status
Solution
Blinking red
Indicates that a critical
error that will affect system
operation has occurred.
Example:
ˎ
An error that hinders
network transmission has
been detected.
ˎ
A temperature error on a
board has been detected.
ˎ
A reduction in fan
performance has been
detected
ˎ
An error that requires
a unit restart has been
detected.
ˎ
Check the cables
connected to the unit
and the signal status.
ˎ
Check the installation
status of the unit
(NXL-FR316) in which
the board is installed
ˎ
Restart the unit.
If the status indicator
continues to blink red
after checking these
items and restarting the
unit, stop using the unit
and contact your Sony
representative.
Software licenses
You can extend the functionality of the unit by installing the following
software licenses. For details, consult your Sony service or sales
representative.
NXLL-SN50 SNMP Agent Software
Supports remote operation using the SNMP protocol.
Software version V2.00 or later can be installed on the unit.
NXLL-AM50 Audio Delay & Channel Mapping Software
Supports delay of an audio stream received from a network, and output to
SDI connectors or a network.
Software version V2.30 or later can be installed on the unit.
NXLL-MC50 Multi Format Converter Software
Supports QFHD up-converted or HD down-converted video signal output.
Simultaneously, SDR/HDR conversion and color correction functions are
supported.
Software version V2.00 or later can be installed on the unit.
Specifications
General specifications (common to NXLK-IP50Y/NXLK-IP51Y)
Power supply
DC 12 V (supplied from NXL-FR316)
Power consumption
3.3 A, 40 W
Dimensions
(width / height / depth)
Main board: 114.5 × 13.1 × 408.7 mm
(4
5
/
8
×
17
/
32
× 16
1
/
8
in.)
Connector board: 131 × 17.7 × 95.4 mm
(5
1
/
4
×
23
/
32
× 3
7
/
8
in.)
Mass
Main board: Approx. 370 g (13 oz)
Connector board: Approx. 100 g (3.5 oz)
Temperature ranges
Operation guaranteed temperature:
5
°C
to 40
°C
(41
°
F to 104
°
F)
Performance guaranteed temperature:
10
°C
to 35
°C
(50
°
F to 95
°
F)
Storage temperature:
–20
°C
to +60
°C
(–4
°
F to +140
°
F)
SDI input/output specifications
Connectors
DIN 1.0/2.3 type: 75 Ω
(NXLK-IP50Y/NXLK-IP51Y)
BNC type: 75 Ω (NXLK-IP51Y only)
Number of lines
NXL K-IP50Y: 3 inputs (DIN 1.0/2.3 type),
5 input/outputs (DIN 1.0/2.3 type)
NXL K-IP51Y: 2 inputs (DIN 1.0/2.3 type +
BNC type), 1 output (DIN 1.0/2.3 type),
1 input/output (BNC type)
Signal formats
SMPTE ST424, SMPTE ST292-1
(NXLK-IP50Y/NXLK-IP51Y)
SMPTE ST2082 (NXLK-IP51Y only)
Network (LAN) specifications (common to NXLK-IP50Y/NXLK-IP51Y)
Connectors
SFP28
Sony OTM-25GSR and OTM-25GLR
transceivers, and modules with power
consumption of 1.0 W or lower are supported.
Copper DAC (Direct Attach Cable) is not
supported.
Number of lines
2
Signal formats
25GBASE-** (using SFP28 transceiver module)
For details on supported SFP28 transceiver
modules (such as OTM-25GSR/OTM-25GLR),
contact your local Sony representative.
Supplied accessories (common to NXLK-IP50Y/NXLK-IP51Y)
Operating Instructions (1)
Design and specifications are subject to change without notice.
This product uses OSS (Open Source Software) components. For detailed
license information, refer to the installation manual.
