Sony NWZ-X1050, Service Manual

Page: 32 / 34

32
NWZ-X1050/X1051/X1060/X1061
SECTION 6
ELECTRICAL PARTS LIST
A-1602-782-A HOME KEY BOARD, COMPLETE
*************************
When HOME KEY board is defective, exchange the entire mounted board.
************************************************************
9-885-133-37 MAIN BOARD, COMPLETE (16G) (for SERVICE)
(NWZ-X1050: E, AUS, JE)
9-885-133-38 MAIN BOARD, COMPLETE (16G) (for SERVICE)
(NWZ-X1050: CH)
9-885-133-39 MAIN BOARD, COMPLETE (16G) (for SERVICE)
(NWZ-X1050: MX)
9-885-133-41 MAIN BOARD, COMPLETE (16G) (for SERVICE)
(NWZ-X1050: AEP, UK)
9-885-133-43 MAIN BOARD, COMPLETE (16G) (for SERVICE)
(NWZ-X1050: FR)
9-885-133-44 MAIN BOARD, COMPLETE (16G) (for SERVICE)
(NWZ-X1050: EE)
9-885-133-45 MAIN BOARD, COMPLETE (16G) (for SERVICE)
(NWZ-X1051)
9-885-133-46 MAIN BOARD, COMPLETE (32G) (for SERVICE)
(NWZ-X1060: TW)
9-885-133-47 MAIN BOARD, COMPLETE (32G) (for SERVICE)
(NWZ-X1060: E, AUS, JE)
9-885-133-48 MAIN BOARD, COMPLETE (32G) (for SERVICE)
(NWZ-X1060: CH)
9-885-133-49 MAIN BOARD, COMPLETE (32G) (for SERVICE)
(NWZ-X1060: MX)
9-885-133-50 MAIN BOARD, COMPLETE (32G) (for SERVICE)
(NWZ-X1060: CND)
9-885-133-51 MAIN BOARD, COMPLETE (32G) (for SERVICE)
(NWZ-X1060: AEP, UK)
9-885-133-53 MAIN BOARD, COMPLETE (32G) (for SERVICE)
(NWZ-X1060: FR)
9-885-133-54 MAIN BOARD, COMPLETE (32G) (for SERVICE)
(NWZ-X1060: EE)
9-885-133-55 MAIN BOARD, COMPLETE (32G) (for SERVICE)
(NWZ-X1061)
*********************
< CAPACITOR >
C881 1-119-923-11 CERAMIC CHIP 0.047uF 10% 10V
C882 1-119-923-11 CERAMIC CHIP 0.047uF 10% 10V
C883 1-164-943-81 CERAMIC CHIP 0.01uF 10% 16V
C884 1-164-943-81 CERAMIC CHIP 0.01uF 10% 16V
< CONNECTOR >
CN881 (Not supplied) CONNECTOR, FFC/FPC 11P
< FET >
Q881 6-550-747-01 FET 3LP01S-K-TL-E
< RESISTOR >
R881 1-218-985-11 METAL CHIP 470K 5% 1/16W
R882 1-218-953-11 METAL CHIP 1K 5% 1/16W
R883 1-218-985-11 METAL CHIP 470K 5% 1/16W
R884 1-240-695-91 METAL CHIP 1K 5% 1/20W
R885 1-240-695-91 METAL CHIP 1K 5% 1/20W
R886 1-208-927-11 METAL CHIP 47K 0.5% 1/16W
R887 1-208-927-11 METAL CHIP 47K 0.5% 1/16W
R888 1-208-911-11 METAL CHIP 10K 0.5% 1/16W
R889 1-208-911-11 METAL CHIP 10K 0.5% 1/16W
R890 1-208-911-11 METAL CHIP 10K 0.5% 1/16W
R891 1-208-911-11 METAL CHIP 10K 0.5% 1/16W
R892 1-218-985-11 METAL CHIP 470K 5% 1/16W
R893 1-240-726-91 METAL CHIP 470K 5% 1/20W
R895 1-240-760-91 METAL CHIP 100 0.5% 1/20W
R896 1-240-760-91 METAL CHIP 100 0.5% 1/20W
R897 1-218-990-81 SHORT CHIP 0
< SWITCH >
S881 1-786-455-32 SWITCH, PUSH (1 KEY) (HOLD)
*************************************************************
MISCELLANEOUS
**************
BATT1 X-2349-102-1 BATTERY ASSY
CN01 1-822-382-11 CONNECTOR, DOT
EL01 1-802-813-11 ELEMENT, EL INDICATOR
FPC1 1-877-868-11 KEY FLEXIBLE PRINT BOARD
J001 A-1602-784-A 5PIN HP JACK ASSY
TPM1 1-480-788-11 TOUCH PANEL MODULE
*************************************************************
Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
HOME KEY
When indicating parts by reference num-
ber, please include the board name.
Note:
• Due to standardization, replacements in
the parts list may be different from the
parts speci
fi
ed in the diagrams or the com-
ponents used on the set.
• -XX and -X mean standardized parts, so
they may have some difference from the
original one.
• Items marked “ * ” are not stocked since
they are seldom required for routine ser-
vice. Some delay should be anticipated
when ordering these items.
• RESISTORS
All resistors are in ohms.
METAL:
Metal-
fi
lm resistor.
METAL OXIDE: Metal oxide-
fi
lm resistor.
F: non
fl
ammable
• CAPACITORS
uF:
μ F
• COILS
uH:
μ H
• SEMICONDUCTORS
In each case, u:
μ , for example:
uA. . : μ A. . , uPA. . , μ PA. . ,
uPB. . : μ PB. . , uPC. . , μ PC. . ,
uPD. . : μ PD. .
• Abbreviation
AUS :
Australian model
CH : Chinese model
CND : Canadian model
EE
: East European model
FR : French model
JE : Tourist model
MX : Mexican model
TW : Taiwan model
Note 2: When the MAIN board is replaced, there are some notes.
Refer to “NOTE THE MAIN BOARD REPLACING” (page
4) in servicing notes for notes.
MAIN
Note 1: In this set, only a part of parts that relate to the switch
are supplied. Replace a part according to “METHOD OF
JUDGING RIGHT AND WRONG OF PARTS RELATED
TO SWITCH” (page 7) in servicing notes. Exchange the
entire mounted board when parts that do not correspond
to it are defective.