Sony NW-A45, Help Manual

Page: 90 / 154

Hint
You can delete registered Bluetooth device. On the list of connectable devices in [Added Devices], tap beside the name of a
Bluetooth device. Then, select [Delete Device].
The passkey may also be called a “passcode”, “PIN code”, “PIN number”, or “password”.
The Walkman can stay connected to a Bluetooth device until you turn off the Bluetooth function. When you are not using the
Bluetooth function, turn off the Bluetooth function.
Note
Pairing information is deleted in the following situations. Pair the devices again.
One or both of the devices are reset to the factory settings.
Pairing information is deleted from the devices, such as when the devices are repaired.
The battery life becomes considerably shorter when the Bluetooth function is active.
You can pair the Walkman with a maximum of 7 devices. If the number of paired devices exceeds the maximum, the Walkman
will delete the oldest connected device.
If the pairing times out before it is finished, perform the procedure again starting from the Bluetooth connection screen.
There are some restrictions on sound output through a Bluetooth connection.
Even if you connect a pair of headphones to a headphone jack, sound will not be output from the headphones. Sound is output
from the Bluetooth device preferentially.
Even if you connect a speaker to the WM-PORT jack, sound will not be output from the speaker. Sound is output from the
Bluetooth device preferentially.
You cannot listen to FM radio while there is an active Bluetooth connection.
You cannot listen to played-back sound wirelessly while the USB-DAC function is active.
If sound is interrupted or skips during a Bluetooth connection, try the following.
Place the Walkman and the Bluetooth device closer together.
Select [SBC - Connection Preferred] by tapping the following menu items.
– [Settings] – [Audio Device Connection Settings] ([Bluetooth]) – [Wireless Playback Quality].
A Bluetooth connection is terminated automatically in the following cases:
The battery of the Walkman has run out.
The Walkman is turned off.
When there is an active Bluetooth connection, the sound quality settings are invalid.
Related Topic
Connecting the Walkman to a paired Bluetooth device
One-touch connections with a Bluetooth device (NFC)
Configuring the Bluetooth function
Notes on the Bluetooth function
While the Bluetooth device is connected, tap the menu items in the following order.
– [Settings] – [Connect to/Add Audio Device] ([Bluetooth]).
1.
Tap the name of the Bluetooth device from [Added Devices].
2.
The contents of the Help Guide may be subject to change without notice due to updates to the product's specifications.
90