61
System Fault Troubleshooting
System Fault Troubleshooting
In the OR IP Solution System, system faults are displayed on the [Notification List] screen and [Network Topology
Monitoring] screen on the Network System Manager screen. This section describes how to resolve common faults detected
by Network System Manager. For details about fault detection and troubleshooting for each device, refer to the operating
instructions or service manual of each device.
[Notification List] screen
[Network Topology Monitoring] screen
Error display:
In the following description, the content of an error message is represented by "***" characters. The content will vary
depending on the type of error. The display of a “The device "***" detected *** status.” error message may be resolved
to display, for example, “The device "5042S_T101" detected error status.” on the Network System Manager screen.
Tip