NSZ-GS7/NSZ-GX70 24
SECTION 3 - UPDATES AND ADJUSTMENTS
REFURBISHING THE NETWORK MEDIA PLAYER
Regardless of why the Network Media Player is being serviced, the following
steps must be completed
Required Steps:
;
Update the Software
;
Re-initialize the Network Media Player to Factory Mode
;
Complete Basic Tests
;
Reset the Remote Commander
A small thin, sharp object, such as the point of a pen or a small screw driver,
is required to push in the
Connect
button on the Network Media Player to
display the service menu.
Required Equipment:
;
TV to display the Network Media Player menus
;
USB memory drive formatted in FAT32
;
USB keyboard - Required to select the service menu options.
;
HDMI cable
UPDATING THE SOFTWARE
The latest software version must be installed when a Network Media Player
is in for service.
1. Download the latest software update onto the USB memory drive.
2. Insert the USB memory drive with the software update into the
USB input slot on the back of the Network Media Player.
USB Input
3. Connect the USB keyboard to the other USB input slot.
4. Disconnect the AC Power Cord from the Network Media Player.
5. Connect the Network Media Player to the TV using the HDMI cable
between the HDMI Out and HDMI In ports respectively.
6. Proceed to
INSTALLING THE SOFTWARE
1. Power on the Network Media Player by plugging it into an AC
power source (typical residential AC power source only) and allow
the Network Media Player to boot completely until the
Home
menu
displays.
2. Using a thin, sharp object, such as the point of a pen or small
screw driver, press and hold the
Connect
button (located on the
bottom of the Network Media Player) down for 10 seconds.
3. Release the
Connect
button.
Wait 10 to 15 seconds until the
Android System Recovery
screen
displays.
Android system recovery <2end-sony-927>
Use arrow keys to highlight, enter to select.
Reboot system now [CTRL+R]
Factory reset and keep Remot Control paired [CTRL+W]
Factory reset and un-pair Remote Control
Sowared update via USB update (update.zip) [CTRL+S]
Service mode [CTRL+A]
Power off
