Sony NEX-VG30 Instruction & Operation Manual Download

Page: 15 / 116

Table of C

ten

Sear
ch image

Inde
x

Step 3: Charging the battery pack

You can charge the “InfoLITHIUM” battery pack (V series) after attaching it to your

camcorder.

Notes

You cannot attach any “InfoLITHIUM” battery pack other than the V series to your camcorder.

You cannot attach the “InfoLITHIUM” battery pack NP-FV30/FV50, even though they are V series.

Slide the POWER switch to OFF (the default setting).

Attach the battery pack by sliding it in the direction of the arrow until it
clicks.

Connect the AC Adaptor and the power cord (mains lead) to your
camcorder and the wall outlet (wall socket).

The CHG (charge) lamp lights up and charging starts. The CHG (charge) lamp turns off
when the battery pack is fully charged.






Battery pack

CHG (charge) lamp

DC IN jack

To the wall outlet

(wall socket)

AC Adaptor

DC plug

Power cord

(Mains lead)

Align the



mark on the DC plug

with that on the DC IN jack.

Summary of Contents for NEX-VG30





















































































































Search results

Summary of Contents for NEX-VG30

Reviews:

Related manuals for NEX-VG30

Brands by name

Popular brands

Sony NEX-VG30, Instruction & Operation Manual

Search results

Summary of Contents for NEX-VG30

Reviews:

Related manuals for NEX-VG30

Brands by name

Popular brands