3-1
NEX-FS700/FS700K/FS700C/FS700CK/FS700E/FS700EK/FS700J/FS700JK/FS700R/FS700RH/FS700U/FS700UK
3. ASSEMBLY
Assembly-1:
Installation Cautions of the Cabinet (R (Front))
Section.
Cabinet (R (Front))
Section
Raise the ND Change Lever one step
from the bottom to the 1/4ND position.
Set the ND Select Switch to the
1/4ND position.
1/4ND
ND Select Switch
ND Change Lever
Assembly-2:
Installation Cautions of the AU Cover.
Route the harness (Coaxial Cable)
as shown.
AU Cover
3-1. ASSEMBLY
Assembly-3:
Installation Cautions of the Coaxial Harness.
Coaxial Harness
Route the coaxial harness as shown.
Flexible Clamp
(Rear)
Assembly-4:
Putting position of the IM Adjust Washer (A).
Adjust IM
Washer (A)
Adjust IM Washer (A)
Adjust IM Washer (A)
Assembly-5:
Attaching method of the CM Radiation Sheets.
Three CM Radiation Sheet
Imager Unit
Three CM Radiation
Sheets
Three CM Radiation
Sheet
MT Heat Sink
MT Heat Sink
Three CM
Radiation
Sheets
Three CM Radiation
Sheets
Plate
1
2
3
4
CM Radiation
Sheet (Ist)
CM Radiation
Sheet (2nd)
CM Radiation
Sheet (3rd)
CM Radiation
Sheet (4th)
CM Radiation
Sheet (4th)
Plate
Plate
Plate
Attach the three CM Radiation Sheets to a plate.
Attach the three CM Radiation Sheets (4th).
Attach the three CM Radiation Sheets to the Imager
Unit and MT Heat Sink.
Peel off the three CM Radiation Sheets from a plate.
Assembly-6:
Apply grease on the MB N Plate SP.
MB N Plate SP
G
G-85
(J-6082-626-A)
Assembly-7:
Apply grease on the LCD Lock Bolt.
LCD Lock Bolt
Screwing position
G
G-85
(J-6082-626-A)
