94
(AUDIO SET) menu
Settings for the audio recording
(
AUDIO FORMAT/XLR SET, etc.)
The default settings are marked with
B
.
See page 82 for details on selecting
menu items.
You can set the audio format for high
definition image quality (HD) recording.
B
LINEAR PCM (
)
Records in Linear PCM system.
DOLBY DIGITAL (
)
Records in Dolby Digital system.
b
Notes
• Audio format is fixed to [DOLBY DIGITAL]
with the standard definition image quality (SD)
recording.
You can set the clipping-noise reduction
function for CH1/CH2.
B
OFF
Disables the function.
ON
Enables the function.
b
Notes
• This function is available only when you set the
AUTO/MAN (CH1/CH2) switches to MAN.
You can set the sound to output to the
headphone when the HEADPHONE
MONITOR switch is set to STEREO MIX.
B
STEREO
Outputs in stereo.
MONO
Outputs in monaural.
Press the MENU button
t
select
(AUDIO SET) with the SEL/PUSH
EXEC dial.
AUDIO FORMAT
AUDIO LIMIT
HEADPHONE OUT
x
XLR AGC LINK
You can select either linked or separate
AGC (Auto Gain Control) of CH1 and CH2
when using an external microphone.
B
SEPARATE
Separately applies the AGC for CH1/CH2.
Sound inputs from CH1/CH2 will be
recorded as separate sound.
LINKED (
)
Applies the AGC of CH1 linked with that
of CH2. Sound inputs from CH1/CH2 will
be recorded as a set of sound such as stereo
sound.
appears on the status check
screen.
b
Notes
• This function is available when the CH1 and
CH2 switches are both set to AUTO and the
INPUT 1 and INPUT 2 switches are both set to
MIC or both set to LINE (p. 53).
x
INPUT1 TRIM
You can adjust the input signal level from
INPUT 1.
-18dB, -12dB, -6dB,
B
0dB, +6dB,
+12dB
b
Notes
• The setting is not effective when you set the
INPUT 1 switch to LINE.
x
INPUT1 WIND
B
OFF
Disables wind noise reduction.
ON
Enables wind noise reduction.
appears on the status check screen.
b
Notes
• The setting is not effective when you set the
INPUT 1 switch to LINE.
x
INPUT2 TRIM
x
INPUT2 WIND
XLR SET
A
