background image

Advanced Operations

21

B

 Advanced Operations

Repeat mode

There are 3 types of repeat mode: Track
Repeat, A-B Repeat, and Sentence Repeat.

• Track Repeat (Track Rep)

This mode plays back tracks repeatedly in
the following 3 ways.

Track Repeat
mode

Repeat

Single Repeat

Shuffle Repeat

• A-B Repeat (A-B Rep)

This mode plays back the specified section
in a track repeatedly.

• Sentence Repeat (Sentence Rep)

This mode plays back voice data within a
specified section in a track repeatedly.

Selecting the repeat mode

1

Press and hold the SEARCH/
MENU button for half a second in
stop mode.

The menu screen is displayed.

Repeat Mode
Sound
Volume Mode

2

Rotate the Shuttle switch to select
“Repeat Mode>” and press the

Nx

 button to confirm.

Operation

All the songs in the Play
Range (coverage of
playback) are played back
repeatedly.

The current song is
played back repeatedly.

All the songs in the Play
Range (coverage of
playback) are played back
repeatedly in random
order.

Nx

 button

SEARCH/
MENU button

Shuttle switch

to 

>

to 

.

continued

Summary of Contents for Network Walkman NW-E403
























































Reviews: