NAS-Z200DiR/Z200iR.GB.4-151-738-
12
(1)
1
GB
1
Connect the AM loop antenna
(aerial).
Locate the antenna away from the unit and
other AV equipment. Adjust the location and
angle for good AM reception.
2
Connect the FM wire antenna (aerial).
FM wire antenna
Adjust the location and angle for good FM
reception.
If preferred, use a commercially available
75
coaxial cable to connect the unit to an
external antenna to improve reception.
Ensure the antenna is fully extended.
3
Connect the DAB wire antenna
(aerial) (UK model only).
DAB wire antenna
Use an external DAB antenna (aerial) for a
more robust DAB signal. It is recommended
you only use the supplied DAB wire antenna
for areas of strong DAB reception or as
a temporary measure until you install an
optional external antenna.
Use a 75
coaxial cable with male F type
connector to connect the unit to an external
antenna.
Ensure the antenna is fully extended.
4
Connect the power cord to a wall
outlet.
Note
Keep the FM and AM antennas away from the power
cord, remote control, remote control charger, AC power
adaptor and USB cable to avoid picking up noise.