Sony MZ-NHF800, Operating Instructions Manual

Page: 71 / 132

71
2
Turn the jog dial until “AVLS On”
appears in the display, and then press
N
ENT to enter the selection.
Turning off the beep
sound
You can turn off/on the beep sound on the
recorder and the remote control.
1
Enter the menu and select “Option” -
“Beep”.
2
Slide the jog lever repeatedly until
“Beep Off” appears in the display,
and then press the jog lever to enter
the selection.
To turn on the beep sound
Select “Beep On” in step 2.
1
Enter the menu and select “Option” -
“Beep”.
2
Turn the jog dial until “Beep Off”
appears in the display, and then press
N ENT to enter the selection.
Storing the settings for
individual discs (Disc
Memory)
The recorder is factory set to
automatically store settings for each disc.
The recorder automatically stores the
settings for a disc and retrieves them
whenever the disc is inserted.
The following setting can be stored:
• Bookmark
• “Custom1” and “Custom2” settings of
6-Band Equalizer
You can check the setting as follows.
1
Remove the disc from the recorder,
enter the menu and select “Option” -
“Disc Mem”.
2
Slide the jog lever repeatedly “On”
appears in the display, and then press
the jog lever to enter the selection.
To set the recorder so that
disc settings are not stored
Select “Off” in step 2.
Erasing the disc information
1
Insert the disc whose information is
to be erased and verify its contents.
2
Select “1MemErase” in step 2.
The disc information is erased.
z
When “Disc Mem” is set to “On”, “Disc Mem”
(“Disc Memory” on the recorder) appears
whenever a disc for which settings have been
stored is inserted.
On the recorder
DISPLAY
Jog lever
5-way control key
(
N
ENT)
NAVI/
MENU
Jog dial
DISPLAY
Jog lever