Sony MZ-NHF800, Operating Instructions Manual

Page: 60 / 132

60
• When the total number of characters in the
titles on a disc exceed the maximum that can
be input:
—If the disc is being used in Hi-MD mode,
you can make a group setting, but cannot
add a group name in step 4.
—If the disc is being used in MD mode, you
cannot make a group setting.
• The tracks or groups must be sequential. If the
desired tracks or groups are not consecutive,
you must move them to make them
consecutive before you can assign them
(“Moving recorded tracks or groups (Move)”,
page 61).
1
While the recorder is stopped, enter
the menu and select “Edit” - “
:
Set”.
2
Slide the jog lever repeatedly until the
number of the desired first track
appears in the display, and then press
the jog lever.
This selects the first track of a new
group. If the disc contains groups,
only the first track number of each
group is displayed.
3
Slide the jog lever repeatedly until the
number of the desired last track
appears in the display, and then press
the jog lever.
This selects the last track of the new
group and the group can be labeled. If
the disc contains groups, only the last
track number of each group is
displayed.
4
Label a group (see “Adding titles
(Title)” (page 55)).
•
In step 2, the first track must be either the first
track of an existing group or a track that does
not belong to a group.
•
When selecting the last track in step 3, make
sure the track comes after the one selected in
step 2. The last track must be either the last
track of an existing group or a track that does
not belong to a group.
1
Enter the menu and select “Edit” -
“
: Set”.
2
Turn the jog dial until the number of
the desired first track appears in the
display, and then press
N ENT to
enter.
3
Turn the jog dial until the number of
the desired last track appears in the
display, and then press
N ENT to
enter.
4
Label a group (see “Labeling”
(page 58)).
Notes
Jog lever
DISPLAY
x
Notes
On the recorder
5-way control
key (
N ENT)
NAVI/
MENU
Jog dial
x