Sony MZ-NH700 Operating Instructions Manual Download Page 93

Page: 93 / 128

PROTECTED
DISC

• You tried to record or edit on a disc with the tab in the record-protect

position.

Slide the tab back (page 79).

PUSH STOP
BUTTON

• You tried to open the lid by sliding the OPEN switch while the recorder

was storing disc information with the dedicated USB cable connecting the
recorder to a computer.

Operation must be done only after pressing

and “SYSTEM FILE

WRITING” has disappeared from the display.

READ ERROR

• The recorder cannot read the disc information correctly.

Reinsert the disc.

REC ERROR

• Recording was not correctly done.

Place the recorder at a place with no vibrations and record again.

• The disc is soiled with an oil film or finger prints, is scratched, or is not a

standard disc.

Try recording again with another disc.

SYSTEM FILE
WRITING

• The recorder is storing information (track start and end position) from the

memory to the disk.

Wait until this process is completed. Do not expose the player to
physical shock, nor disrupt power supply.

TEMP OVER
REC STOP

• Heat has built up in the recorder.

Let the recorder cool down.

TITLE FULL

• You tried to enter more than approximately100 letters (in Hi-MD mode) or

200 letters (in MD mode) to label a single track, group, or disc.

• You tried to enter a total of more than approximately 27,000 letters (in Hi-

MD mode) or 1,700 letters (in MD mode) for titles.

TOC DATA
ERROR

• The recorder cannot read the disc information correctly.

Insert another disc.

If it is no problem to erase the entire disc, do so (page 63).

TRACK FULL

• You tried to record more than 2,047 tracks on a disc in Hi-MD mode or

more than 254 tracks on a disc in MD mode.

Erase unnecessary tracks (page 63).

TRK FROM PC
NO EDIT

• You tried to combine or divide tracks that were transferred from the

computer.

You cannot combine or divide transferred tracks.

• You tried to combine or divide tracks that were recorded in Hi-MD mode

using the MD Simple Burner software.

You cannot combine or divide tracks recorded in Hi-MD mode with
the MD Simple Burner software.

TRK FROM PC
NO REC

• You tried to record in the middle of a protected track that has been

transferred from the computer.

• You tried to record in the middle of a track that was recorded in Hi-MD

mode with the MD Simple Burner software.

You cannot record new material in the middle of a protected track or a
track that was recorded in Hi-MD mode with the MD Simple Burner
software.

Message

Meaning/Remedy

Summary of Contents for MZ-NH700

































































































































Search results

Summary of Contents for MZ-NH700

Reviews:

Sony MZ-NH700, Operating Instructions Manual, Page: 93 / 128

Search results

Summary of Contents for MZ-NH700

Reviews: