Sony MZ-NH600 Operating Instructions Manual Download Page 74

Page: 74 / 112

Messages

If the following messages flash in the display window, check the chart below.

Message

Meaning/Remedy

AVLS NO
VOLUME
OPERATION

• AVLS is set to “AVLS On” and so the volume cannot rise higher.

Set AVLS to “AVLS Off” (page 52).

BLANKDISC

• A disc with no recording on it is inserted.

BUSY WAIT A
MOMENT

• The recorder is accessing disc information.
• You tried to operate the recorder while it was accessing the recorded data.

Wait until the message goes out (in rare cases, it may take a few
minutes).

CANNOT EDIT

• You selected, “

: Set”, “

: Release”, “Move”, or “Erase” while

recording.

• You tried to erase the track mark at the beginning of the first track or

group.

• You tried to erase a track mark to combine tracks the recorder cannot

combine (a track recorded in stereo and in mono, for example).

• You tried to overwrite a track marks.
• You tried to change a title that includes characters the recorder cannot

edit.

Editing titles cannot be done if the title includes characters that
cannot be input on the recorder.

CANNOT
OPERATE

• You tried to press

or T MARK during synchro-recording.

CANNOT
RECORD OR
PLAY

• There is no audio data that can be played on the recorder.
• The audio data or disc management file has been damaged.

Erase the whole disc (page 48) or perform the Format function
(page 50).

CANNOT SET

• You tried to make the Time Mark setting during synchro-recording.
• You selected “RECVolume” while the recorder is not in recording-pause.

Set “RECVolume” while the recorder is in recording-pause.

• You tried to make the following settings while recording.

— Disc Memory
— Play mode
— Recording mode
— Recording level
— Selection of “

:REC” in menu

DATA SAVE

• The recorder is writing information to the system file, such as the

recorded data or editing information.

Wait until the message disappears from the display.

DC IN TOO
HIGH

• Voltage of the power supply is too high (The recommanded optional AC

power adaptor or car battery cord is not being used).

Use the recommanded (optional) AC power adaptor or car battery
cord.

Summary of Contents for MZ-NH600

















































































































Search results

Summary of Contents for MZ-NH600

Reviews:

Related manuals for MZ-NH600

Brands by name

Popular brands

Sony MZ-NH600, Operating Instructions Manual

Search results

Summary of Contents for MZ-NH600

Reviews:

Related manuals for MZ-NH600

Brands by name

Popular brands