Sony MZ-N707 OpenMG Jukebox NOTES on installing & operating, Operating Instructions Manual

Page: 67 / 240

67
-GB
Volume cannot be
turned up. • AVLS is on.
, Set AVLS to “AVLS OFF” (page 56).
An MD is not played
normally. • Play mode is changed.
, Change to the normal play.
An MD is not played
from the first track. • Disc playing stopped before it came to the last track.
, Press N for 2 seconds or more to start playing, or press the
control towards
.
repeatedly on the remote control.
• Group mode is turned on.
,
Turn group mode off and play from the first track (press
N
for 2 seconds or more to start playing, or press the control
towards
.
repeatedly on the remote control).
Playback sound
skips. • The recorder is placed where it receives continuous vibration.
, Put the recorder on a stable place.
• A very short track may cause sound to skip.
, Try not to create a track under one second long.
Sound has a lot of
static. • Strong magnetism from a television or such device is interfering
with operation.
, Move the recorder away from the source of strong
magnetism.
Cannot find the track
marks. • You pressed X after pressing . or > .
, Press X before pressing . or > .
The rechargeable
battery does not start
charging. The
rechargeable battery
cannot be fully
charged. • The rechargeable battery has been inserted incorrectly or the AC
power adaptor has been connected incorrectly.
, Insert the battery correctly or connect the AC power adaptor
correctly.
• The terminals of the battery charging stand is dirty.
,
Clean the terminals with a dry cloth (page 60).
The disc cannot edit
on other component. • The component does not support LP2 stereo or LP4 stereo.
, Edit on other component that support LP2 stereo or LP4
stereo.
Momentary noise is
heard. • Due to the special digital audio compression technology used in
LP4 stereo mode, momentary noise may occur on very rare
occasions with certain sound sources.
, Record in normal stereo or LP2 stereo mode.
The group function
(group mode/group
skip mode) does not
operate. • When selecting program play, an attempt was made to turn
group mode on.
, Turn group mode on, before selecting program play.
The display window
is not normal. • The recorder was disconnected from the power source.
,
Let the recorder sit for a while, or disconnect the power
source, reconnect it, and then press any of the operation
buttons.
Symptom Cause/Solution