Sony MZ-N510CK Operating Instructions Manual Download

Page: 76 / 108

Installing the software onto your computer

This section explains the installation of the SonicStage Ver.1.5 software supplied with your
Net MD.

Before installing the software

1 Make sure to note the following before installing the software.

Do not connect the dedicated USB cable before the installation!

The SonicStage software may not correctly load or operate if the dedicated USB
cable is connected to your computer during the installation.

Close all other Windows applications before starting the installation!

Make sure to close any virus-check software, as such software usually demand large
amounts of system resources.

2 Depending on the following operating system or software already installed

on your computer, refer to the reference pages before installing the
software.

Windows XP

page 90

• To install this software, you must log on with a

user name with “Computer Administrator”.

• If you perform the “System Restore” function in

the Windows “System Tools” menu, the tracks
managed by SonicStage may become corrupted
and rendered unplayable.

Windows Millennium Edition

page 91

• If you perform the “System Restore” function of

the Windows “System Tools” menu, the tracks
managed by SonicStage may become corrupted
and rendered unplayable.

Windows 2000

page 91

• You must log on as “Administrator” before

installing the software.

OpenMG Jukebox,
SonicStage, or SonicStage
Premium

page 92

• Depending on the version of your software, the

existing software may be overwritten by the new
version or it may co-exist with SonicStage
Ver.1.5. As the installation process will depend
on the version, see the reference page for details.

Summary of Contents for MZ-N510CK













































































































Search results

Summary of Contents for MZ-N510CK

Reviews:

Related manuals for MZ-N510CK

Brands by name

Popular brands

Sony MZ-N510CK, Operating Instructions Manual

Search results

Summary of Contents for MZ-N510CK

Reviews:

Related manuals for MZ-N510CK

Brands by name

Popular brands