24
MZ-N10
Overall Adjustment Mode
• Configuration of overall adjustment mode
Adjustment required before Overall Adjustment
Note : Modify five adjusted values through the following proce-
dure before performing the CD overall adjustment and MO
overall adjustment.
• Adjusted values modifying procedure
1. Select manual mode of the test mode, and set item number
822 (see page 12).
2. Adjust with the
[VOL +]
key (adjusted value up) or
[VOL --]
key (adjusted value down) so that the adjusted value becomes
03.
3. Press the
X
key to write the adjusted value.
4. Select manual mode of the test mode, and set item number
870 (see page 12).
5. Press the
>
key to set item number 875.
6. Adjust with the
[VOL +]
key (adjusted value up) or
[VOL --]
key (adjusted value down) so that the adjusted value becomes
3E.
7. Press the
X
key to write the adjusted value.
8. Press the
>
key to set item number 876.
9. Adjust with the
[VOL +]
key (adjusted value up) or
[VOL --]
key (adjusted value down) so that the adjusted value becomes
00.
10. Press the
X
key to write the adjusted value.
11. Press the
>
key to set item number 881.
12. Adjust with the
[VOL +]
key (adjusted value up) or
[VOL --]
key (adjusted value down) so that the adjusted value becomes
37.
13. Press the
X
key to write the adjusted value.
14. Press the
>
key to set item number 882 .
15. Adjust with the
[VOL +]
key (adjusted value up) or
[VOL --]
key (adjusted value down) so that the adjusted value becomes
E0.
16. Press the
X
key to write the adjusted value.
Remote commander LCD display
**
: Adjusted value
###S **
822
Remote commander LCD display
**
: Adjusted value
###S **
875
Remote commander LCD display
**
: Adjusted value
###S **
876
Remote commander LCD display
**
: Adjusted value
###S **
881
Remote commander LCD display
**
: Adjusted value
###S **
882
Overall adjustment mode
(Title display)
"Assy**"
Continuing overall adjustment
x
key
.
key
>
key
CD overall
adjusting
MO overall
adjusting
Electrical
offset
adjustment
NV reset
(item number 21)
Automatic
Disc
discrimination
overall
adjustment
Temperature
correction
and
Power supply
adjustment
auto item feed
Jog dial (down) or
[DISPLAY]
key
on the remote commander
Jog dial (up) or
[P MODE]
key
on the remote commander
[GROUP]
key or
key
on the remote commander
N
key or
u
key
on the remote commander
Summary of Contents for MZ-N10
Page 65: ...65 MZ N10 MEMO ...
