Sony MZ-B50, Operating Instructions Manual

Page: 30 / 136

30
-GB
Labeling a disc during stop
1
Insert a disc.
When a disc is already inserted, make
sure the recorder is stopped.
2
Press EDIT/ENTER.
“
: Name” flashes in the display.
3
Press EDIT/ENTER again.
The disc is ready to be labeled.
4
Press . or > repeatedly to
select a letter and press N to enter.
The selected letter stops flashing and
the cursor moves to the next input
position.
5
Repeat step 4 and enter all characters
of the label name.
To cancel labeling, press
x STOP or
TRACK MARK.
6
Press EDIT/ENTER
.
The track or disc is labeled.
Labeling a track during
playback
1
Insert a disc and play the track you
want to label.
2
Press EDIT/ENTER.
“
: Name” flashes in the display
and the recorder plays the selected
track repeatedly.
3
Press EDIT/ENTER again.
The track is ready to be labeled.
4
Follow steps 4 to 6 of “Labeling a
disc during stop”.
Labeling a track or a disc
during recording
1
While recording, press EDIT/
ENTER.
“
: Name” flashes in the display.
2
To label a track, press EDIT/ENTER
again.
To label a disc, press
. or >
repeatedly until “ : Name” flashes
in the display, then press EDIT/
ENTER.
The track or disc is ready to be
labeled.
3
Follow steps 4 to 6 of “Labeling a
disc during stop”.
To cancel labeling, press x STOP or
TRACK MARK.
To relabel recordings
Follow the steps corresponding to the
labeling method until the disc or track is
ready to be labeled. Enter a new character
over the one you want to change, then
press the EDIT/ENTER button.
Press To
X Switch between
capital letters, small
letters, and marks /
numbers.
. / > Change the letter to
the one before / next
one.
EASY
SEARCH
+/– Move the cursor to the
left or right.
DISPLAY Insert a blank space to
type in a new letter.
PLAY
MODE Delete a letter and
move back all
following letters to the
left.
x STOP Cancel labeling.
TRACK
MARK Cancel labeling.