Sony MVS-8000X SystemMVS-7000X System, User Manual

Page: 310 / 706

USO
RESTRITO
310
Applying Special Effects (Effects on the Overall Video Signal)
Knob Parameter Adjustment Setting values
1 Clip Reference
level for
highlight
detection 0.00 to 100.00
2 Gain Amount of
gain for
highlights
–100.00 to +100.00
3 Soft Softness 0.00 to 100.00
Knob Parameter Adjustment Setting values
1 Luminance Luminance 0.00 to 100.00
2 Saturation Saturation 0.00 to 100.00
3 Hue Hue 359.99 to 0.00
Knob Parameter Adjustment Setting values
1 Luminance Luminance 0.00 to 100.00
2 Saturation Saturation 0.00 to 100.00
3 Hue Hue 359.99 to 0.00
Knob Parameter Adjustment Setting values
1 Start Point where
fading starts
(fade start
point)
–100.00 to +100.00
2 Gain Degree of
fading 0.00 to 100.00
Ch
a
p
te
r 11
DM
E
O
p
e
ra
ti
o
n
s
Knob Parameter Adjustment Setting values
2 Gain Degree of
dimming 0.00 to 100.00
4
Press [Flat Color] and set the parameters for the color
of the depths of the picture.
4
Press [Matte] and set the glow color.
Applying the Fade effect
1
In the DME menu, select VF7 ‘Enhanced Video
Modify’ and HF3 ‘Dim & Fade.’
The Dim & Fade menu appears.
2
Press [Fade], turning it on.
3
Set the parameters.
Inverting the highlight areas
Press [Glow Invert], turning it on.
The highlight and non-highlight areas are inverted.
Masking the Glow effect with a selected
pattern
Press [Mask] to display the Mask menu and set the type of
pattern and modifiers
(see page 310) .
Glow Settings
Applying the Glow effect
1
In the DME menu, select VF7 ‘Enhanced Video
Modify’ and HF4 ‘Glow.’
The Glow menu appears.
2
Press [Glow], turning it on.
Notes
•
On the MVE-9000 and MVS-7470X/7471X, the key
border function and Glow function cannot be turned
on at the same time. The function most recently
turned on is effective.
•
On the MVE-8000A, the Defocus and Glow effects
or the Blur and Glow effects cannot be turned on at
the same time. The effect most recently turned on is
effective.
3
Set the parameters.
Notes
When the signal format is 1080P on the MKS-7470X/
7471X, masking will cause the edges to get blurred.
Mask Settings
Applying masks
1
In the DME menu, select VF2 ‘Video Modify’ and
HF7 ‘Mask.’
The Mask menu appears.
2
In the <Mask> group, press the button for the group of
the effect to which you want to apply the mask, turning
it on.
Effect Gp 1: Posterization, Solarization, Nega, Sepia,
Mono, Contrast, Mosaic, Sketch, Metal
Effect Gp 2: Defocus, Blur, Glow
Notes
On the MVE-8000A, Effect Gp 1 and Effect Gp 2
cannot be turned on at the same time.