Sony MVS-8000X SystemMVS-7000X System, User Manual

Page: 292 / 706

USO
RESTRITO
292
Applying Special Effects (Edge Effects)
Knob Parameter Adjustment Setting values
1 H Simultane-
ously adjust
width of left
and right key
borders 0.00 to 100.00
2 V Simultane-
ously adjust
width of top
and bottom
key borders 0.00 to 100.00
3 All Simultane-
ously adjust
width of all
four key
borders Value of H shown
4 Soft Softness of
the key
borders 0.00 to 100.00
5 Density Density of
the key
borders 0.00 to 100.00
Knob Parameter Adjustment Setting values
1 Luminance Luminance 0.00 to 100.00
2 Saturation Saturation 0.00 to 100.00
3 Hue Hue 359.99 to 0.00
Ch
a
p
te
r 11
DM
E
O
p
e
ra
ti
o
n
s
Knob Parameter Adjustment Setting values
2 Saturation Saturation 0.00 to 100.00
a)
3 Hue Hue 359.99 to 0.00
a)
a) For the All adjustment, the value for Left is shown.
5
To soften the inside of the edges and the boundaries
between adjacent edges, turn on [Edge Soft], and
adjust the following parameters.
Knob Parameter Adjustment Setting values
1 Inner Soft Softness of
the inside of
edges 0.00 to 100.00
2 Bound Soft Softness of
the edge
boundaries
0.00 to 100.00
Bound
Soft
Inner Soft
4
To set the key border color, press [Flat Color] and
adjust the following parameters.
Key Border Settings
Notes
The Key Border function is not supported on the MVE-
8000A.
Applying key borders
1
In the DME menu, select VF1 ‘Edge’ and HF3 ‘Key
Border.’
The Key Border menu appears.
2
Press [Key Border], turning it on.
Notes
The key border function and Glow function (see page
310) cannot be turned on at the same time. Only the
one most recently turned on is effective.
3
Set the following parameters.
To select an outline only key
Press [Outline], turning it on.
Art Edge Settings
Notes
The Art Edge function is not supported on the MVE-
8000A.
Applying art edges
1
In the DME menu, select VF1 ‘Edge’ and HF4 ‘Art
Edge.’
The Art Edge menu appears.
2
Press [Art Edge], turning it on.
Notes
The Defocus, Blur, Key Border, and Glow effects
cannot be applied to the Art Edge sections.
3
Set the parameters.