T
a
pe
– R
e
cor
d
ing
17
GB
You can record a whole CD on a tape.
You can use TYPE I (normal) tape. The
recording level is adjusted automatically.
Use buttons on the CD player for the operation.
1
Load a recordable tape into deck B.
2
Press TAPE A/B to select deck B, then
press
nN
repeatedly to select
recording side. And press
x
to stop
playback.
3
Press CD and load a disc you want to
record.
4
Press CD SYNC.
Deck B stands by for recording.
“REC” flashes.
5
Press PLAY MODE/DIRECTION
repeatedly to select “
g
” to record on
one side. Select “
j
” (or “RELAY”) to
record on both sides.
6
Press
z
START.
Recording starts.
To stop recording
Press
x
.
To record a disc by specifying
track order
You can record only your favorite CD tracks
using Program Play. Between steps 2 and 3,
perform steps 1 to 5 of “Creating your own
program” (page 10).
Also, you can check the required tape length for
recording a CD. Press PROGRAM EDIT on the
remote after you have loaded a CD in CD
function. The required tape length for the
currently selected CD appears, followed by the
total playing time for side A and side B
respectively (Tape Select Edit).
Note
You cannot use Tape Select Edit for discs containing
over 20 tracks or MP3 files.
Tips
• When you record on both sides, be sure to start from
the front side. If you start from the reverse side,
recording stops at the end of the reverse side.
• If you select both sides recording and the tape
reaches the end of the front side part-way through a
track, the entire track is recorded again from the
beginning of the reverse side.
Tape – Recording
Recording your favorite
CD tracks on a tape
— CD-TAPE Synchro Recording
