![background image](http://html.mh-extra.com/html/sony/mhc-w550/mhc-w550_operating-instructions-manual_1330150013.webp)
Basic Operations
13
n
n
Turn counter-
clockwise
(or press
=
on the remote)
for lower preset
numbers.
TUNED
STEREO
MHz
VOLUME
PRESET
Preset number
Frequency
2
Press TUNING MODE repeatedly
so that “PRESET” appears in the
display.
MANUAL
n
AUTO
n
PRESET
3
Turn the jog dial (or press
=
or
+
on the remote) to tune in the
desired preset station.
To
Do this
Turn off the radio
Press POWER.
Adjust the volume
Turn VOLUME (or press
VOL +/– on the remote).
To listen to non-preset radio
stations
Press TUNING MODE repeatedly so that
“MANUAL” appears in step 2, then tune in
the station by turning the jog dial.
Tips
• Pressing TUNER BAND when the power is off
automatically turns the power on and tunes to the
last received station (One Touch Play).
• You can switch from another source to the radio
just by pressing TUNER BAND (Automatic Source
Selection).
• When an FM program is noisy, press STEREO/
MONO so that “MONO” appears in the display.
There will be no stereo effect, but the reception
will improve. Press the button again to restore the
stereo effect.
• To improve broadcast reception, reorient the
supplied antennas.
Listening to the radio
–– Preset Tuning
Preset radio stations in the tuner's memory
first (see “Step 3: Presetting radio stations”).
Turn clockwise
(or press
+
on the remote)
for higher
preset numbers.
+
–
=
=
2
1
3
STEREO/
MONO
VOLUME
v
=
+
TUNER BAND
VOL +/–
b
B
V
POWER
1
Press TUNER BAND repeatedly
until the band you want appears in
the display.
Every time you press the button, the
band changes as follows:
FM
n
MW
n
SW
Summary of Contents for MHC-W550
Page 43: ...43 ...