background image

10

GB

To tune in a station with a weak
signal

Press + or – repeatedly in step 2 to tune in the
station manually.

To set another station to the exist
preset number

Start over from step 1. After step 3, turn the
jog dial to select the preset number you want
to store the other station.

You can add a new preset number after the
last preset number.

To erase a preset station

1

Keep pressing TUNER MEMORY until a
preset number appears in the display.

2

Turn the jog dial to select the preset
number you want to erase.
Select “ALL ERASE” when you want to
erase all the preset stations.

3

  Press ENTER/NEXT.

    “COMPLETE” appears.
When you erase a preset number, the preset
number decreases by one and all preset
numbers following the erased one are
renumbered.

To change the AM tuning interval

(Except for Middle Eastern models)

The AM tuning interval is factory set to 9 kHz
(10 kHz in some areas). To change the AM tuning
interval, tune in any AM station first, then turn off
the power. While holding down the ENTER/NEXT
button, turn the power back on. When you change
the interval, AM preset stations will be erased. To
reset the interval, repeat the same procedure.

Tip

The preset stations are retained for half a day even if
you unplug the power cord or if a power failure
occurs.

Step 3:  Presetting radio stations
(continued)

Summary of Contents for MHC-VX5

































































Reviews: