Sony MHC-V90W, Operating Instructions Manual

Page: 23 / 72

23
US
Ge
tting S
tar
te
d
MHC-V90W.UC2.4-728-217- 11 (1)
Attaching the unit to a
wall
To prevent the unit from falling
down, attach the unit to a wall by
using a wall anchor and rope.
1
Prepare the hardware listed as
follows (not supplied).
• Wall anchor
Use one that is suitable for the
wall material and weight when
you attach the unit on the wall.
• Rope
Use one that can pass through
the holes of the unit and is
strong enough to support the
weight of the unit.
2
Attach the rope to the unit.
Hole size:

7 mm × 10 mm (9/32 in × 13/32 in)
(W/H)

12.5 mm × 7 mm (1/2 in × 9/32 in)
(W/H)
There are holes on both sides of the
handle.
3
Attach the wall anchor to a wall.
Attach the wall anchor securely to a
wall beam or reinforced wall.
Attach the wall anchor to the
position that is horizontal or slightly
higher than the position of the rope
tied to the unit.
Note
When attaching the wall anchor to
a wall, the wall may be damaged
depending on the material.
4
Attach the unit to the wall.
Make sure that there is no excess
slack in the rope.
Wall-anchor
(not supplied)